www.vishay.com
TPSMA6.8A thru TPSMA43A
Vishay General Semiconductor
Surface-Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
SMA (DO-214AC)
Cathode
Anode
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
PRIMARY CHARACTERISTICS
VWM VBR
5.8 V to 36.8 V 6.8 V to 43 V
PPPM PD IFSM
400 W 1.0 W 40 A
TJ max. Polarity
185 °C Unidirectional
Package
SMA (DO-214AC)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.
FEATURES
• Junction passivation optimized design passivated anisotropic rectifier technology
Available
• TJ = 185 °C capability suitable for high reliability and automotive requirement
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
Available
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
• AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 3) Peak power pulse current with a 10/1000 μs waveform (1) (fig. 1) Power dissipation at TA = 25 °C (4) Peak forward surge current 8.3 ms single half sine-wave (3) Maximum instantaneous forward voltage at 25 A (3) Operating junction and storage temperature range
PPPM IPPM PD IFSM VF TJ, TSTG
400 See next table
1.0 40 3.5 -65 to +185
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads attached to each terminal (3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum (4) Mounted on minimum recommended pad layout
UNIT W A W A V °C
Revision: 19-Apr-2021
1
Document Number: 88405
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
TPSMA6.8.