ATTENUATOR AND POWER PIN DIODES
www.MICROSEMI.com
UM2100
TM
®
ATTENUATOR AND POWER PIN DIODES
2 – 30 MHz
RoHS Compliant Versions Available
DESCRIP...
Description
www.MICROSEMI.com
UM2100
TM
®
ATTENUATOR AND POWER PIN DIODES
2 – 30 MHz
RoHS Compliant Versions Available
DESCRIPTION
UM2100 Series PIN diodes are designed for transmit/receive switch and attenuator applications in HF band (2-30MHz) and below. As series configured switches, these long lifetime (25μs typical) diodes can control up to 2.5 kW, CW in a 50 ohm system. In HF band, insertion loss is less than 0.25dB and isolation is greater than 32dB (off-state). The UM2100 series offers the lowest distortion performance in both the transmit and receive modes. Less than 50 mA forward bias is requires to obtain an IP3 of 60 dBm at 300 kHz with 1 watt per tone. The forward biased resistance/reactance vs. frequency characteristics are flat down to 10 kHz. The capacitance vs. reverse bias voltage characteristic is flat down to 2 MHz. In attenuator configuration, the UM2100 produces extremely low distortion at low values of attenuator control current, and very low insertion loss (0.2dB) in the “0dB” attenuator state.
IMPORTANT:Forthemostcurrentdata,consult MICROSEMI’s website: www.MICROSEMI.com
These devices are ESD sensitive and must be handled use using ESD precautions.
KEY FEATURES HF band (2-30 MHz) PIN
Long Lifetime (25μs typical)
High Power ( 1kW, CW)
High Isolation (32dB)
Low Loss (0.25dB)
Very Low Distortion (IP3=60dBm)
Voltage ratings to 1000 V
RoHS compliant packaging Available1 (use UMX2101B, etc.)
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE S...
Similar Datasheet