600 V High Voltage 3-phase Motor Driver ICs
SCM1200MF Series
Data Sheet
Description
The SCM1200MF series are high volt...
600 V High Voltage 3-phase Motor Driver ICs
SCM1200MF Series
Data Sheet
Description
The SCM1200MF series are high voltage 3-phase motor driver ICs in which
transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.
These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards.
Features
● Each Half-bridge Circuit Consists of a Pre-driver IC ● In Case of Abnormal Operation, All Outputs Shut
Down via Three FO Pins Connected Together ● Built-in Bootstrap Diodes with Current Limiting
Resistors (22 Ω) ● CMOS-compatible Input (3.3 V or 5 V) ● Bare Lead Frame: Pb-free (RoHS Compliant) ● Isolation Voltage: 2500 V (for 1 min),
UL-recognized Component (File No.: E118037) ● Fault Signal Output at Protection Activation ● Protections Include:
Undervoltage Lockout for Power Supply High-side (UVLO_VB): Auto-restart Low-side (UVLO_VCC): Auto-restart
Overcurrent Protection (OCP): Auto-restart Simultaneous On-state Prevention: Auto-restart Thermal Shutdown (TSD): Auto-restart
Typical Application
VCC
VFO
RFO
INT CFO
LIN1
HIN1
U1 SCM1200MF Series
FO1 1 2 OCP1 3 LIN1 4 COM1 5 HIN1
6 VCC1
MIC1
LIN2 HIN2
CBOOT1
7 VB1 8 HS1
FO2 9 10 OCP2 11 LIN2 12 COM2 13 HIN2 14 VCC2
MIC2
Controller
LIN3 HIN3
CBOOT2
15 VB2 16 HS2
FO3 17 18 OCP3 19 LIN3 20 COM3 21 HIN3 22 VCC3
MIC3
CBOOT3
23 VB3 24 HS3
A/D3 RO3
A/D2 RO3
A/D1 RO1
COM
CO1 CO2...