Power Inductors. XAL7030 Datasheet

XAL7030 Datasheet PDF, Equivalent


Part Number

XAL7030

Description

Shielded Power Inductors

Manufacture

Coilcraft

Total Page 4 Pages
PDF Download
Download XAL7030 Datasheet PDF


XAL7030 Datasheet
Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 863-1
Shielded Power Inductors – XAL7030
• High current and very low DCR
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
• Soft saturation makes them ideal for VRM/VRD applications.
Designer’s Kit C441 contains 3 each of all values
Core material Composite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight  0.83 – 0.86 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 400/7reel; 1500/13reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2 DCR (mOhms)3 SRF typ4 Isat5
Irms (A)6
Part number1 ±20% (µH) typ    max (MHz) (A) 20°C rise 40°C rise
XAL7030-161ME_ 0.16 1.15 1.26 158 60.0 24.9 32.5
XAL7030-301ME_ 0.30 1.75 1.92 101 41.0 21.0 27.6
XAL7030-601ME_ 0.60 3.00 3.30 72 36.0 18.0 23.0
XAL7030-102ME_ 1.0 4.55 5.00 52 28.0 16.1 21.8
XAL7030-152ME_ 1.5 7.60 8.36 39 23.5 11.9 15.0
XAL7030-222ME_ 2.2 13.7 15.07 29 18.0 10.0 12.9
XAL7030-272ME_ 2.7 15.7 17.30 32 12.8 9.2 11.4
XAL7030-332ME_ 3.3 19.5 21.45 25 12.3 8.0 10.0
XAL7030-472ME_ 4.7 26.1 30.00 21 10.1 6.9 9.0
XAL7030-562ME_ 5.6 28.1 32.32 17 9.8 5.3 7.3
XAL7030-682ME_ 6.8 45.0 51.75 15 8.7 4.4 6.8
XAL7030-822ME_ 8.2 53.0 60.94 13 8.4 2.9 5.9
XAL7030-103ME_ 10 60.4 69.46 12 7.7 2.6 5.3
1. When ordering, please specify termination and packaging code:
XAL7030-562MEC
Termination: E = Halogen free component. RoHS compliant tin-silver over copper terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(1500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 863-1  Revised 01/14/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

XAL7030 Datasheet
HIGH TEMPERATURE
Shielded Power Inductors – XAL7030
Typical L vs Frequency
100
0.295 ±0.020
7,5 ±0,5
Document 863-2
10
1
0.1
0.1
10 µH
8.2 µH
654.8..67µµµHHH
3.3 µH
2.7 µH
2.2 µH
1.5 µH
1.0 µH
0.60 µH
0.30 µH
0.16 µH
1 10
Frequency (MHz)
100
0.295 ±0.020
7,5 ±0,5
Dash
number
Indicates start lead
and orientation
of terminations
0.116
2,94
See table
0.123 ±0.010
3,12 ±0,25
0.122
3,1
max
See
table
0.236
6,0
typ
0.256
6,50
See table
Recommended
Land Pattern
Dimensions
are
in
inches
mm
Terminal
Dash thickness (typ)
number (in / mm)
-161
-301
-601
-102
-152
-222
-272
-332
-472
-562
-682
-822
-103
0.0138 / 0.35
0.0138 / 0.35
0.0098 / 0.25
0.0079 / 0.20
0.0059 / 0.15
0.0039 / 0.10
0.0039 / 0.10
0.0039 / 0.10
0.0031 / 0.08
0.0031 / 0.08
0.0024 / 0.06
0.0024 / 0.06
0.0024 / 0.06
Terminal width
±0.004 / ±0,10
(in / mm)
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.063 / 1,60
0.055 / 1,40
0.055 / 1,40
0.055 / 1,40
0.055 / 1,40
0.055 / 1,40
Land pattern
width
(in / mm)
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.070 / 1.78
0.062 / 1.58
0.062 / 1.58
0.062 / 1.58
0.062 / 1.58
0.062 / 1.58
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 863-2  Revised 01/14/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.


Features Datasheet pdf Web page Sample & buy Tools & software Support & FAQ Document 863-1 Shield ed Power Inductors – XAL7030 • Hi gh current and very low DCR • AEC-20 0 Grade 1 qualified (–40°C to +125° C ambient) • Soft saturation makes t hem ideal for VRM/VRD applications. Des igner’s Kit C441 contains 3 each of a ll values Core material Composite Env ironmental  RoHS compliant, halogen f ree Terminations  RoHS compliant tin- silver (96.5/3.5) over copper. Other te rminations available at additional cost . Weight  0.83 – 0.86 g Ambient tem perature  –40°C to +125°C with (4 0°C rise) Irms current. Maximum part t emperature  +165°C (ambient + temp r ise). Derating. Storage temperature  Component: –40°C to +165°C. Tape an d reel packaging: –40°C to +80°C Re sistance to soldering heat  Max three 40 second reflows at +260°C, parts co oled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failur.
Keywords XAL7030, datasheet, pdf, Coilcraft, Shielded, Power, Inductors, AL7030, L7030, 7030, XAL703, XAL70, XAL7, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)