The 5-Phase Stepping Driver
Pulse I/F (AC power input)
The 5-Phase Stepping Driver
PMAPA1S6A01
AC200V/230V
Micro-Step (500 x 1 to 40 divisions)
App...
Description
Pulse I/F (AC power input)
The 5-Phase Stepping Driver
PMAPA1S6A01
AC200V/230V
Micro-Step (500 x 1 to 40 divisions)
Applicable motor
ø86 ø106
Characteristics
Conformity to UL Standards and CE Marking The system conforms to UL Standards and CE Marking. Micro-step function available Smooth operation without vibration at low speeds can be realized. Rush current prevention circuit Thanks to the built-in rush current prevention circuit in the power circuit section,stabilized operation is ensured even during switching on. Connector method for PM driver I/O cable The connector method is adopted for the high voltage section terminal, where the terminal base was conventionally used. This method facilitates PM driver installation and maintenance. Alarm output signal logic selectable Logic of signal output during alarm circuit operation can be selected
Built-in function
Low vibration mode Even setting division of resolution to a rough one or two divisions, operation can be as smooth and with a...
Similar Datasheet