PROTECTION IC. S-8223B Datasheet

S-8223B IC. Datasheet pdf. Equivalent

Part S-8223B
Description BATTERY PROTECTION IC
Feature S-8223A/B/C/D Series www.ablicinc.com © ABLIC Inc., 2017 BATTERY PROTECTION IC FOR 2-SERIAL / 3-SE.
Manufacture ABLIC
Datasheet
Download S-8223B Datasheet

S-8223A/B/C/D Series www.ablicinc.com © ABLIC Inc., 2017 B S-8223B Datasheet
Recommendation Recommendation Datasheet S-8223B Datasheet





S-8223B
S-8223A/B/C/D Series
www.ablic.com
www.ablicinc.com
© ABLIC Inc., 2017-2018
BATTERY PROTECTION IC FOR 2-SERIAL / 3-SERIAL CELL PACK
(SECONDARY PROTECTION)
Rev.1.3_00
The S-8223A/B/C/D Series is used for secondary protection of lithium-ion rechargeable batteries, and incorporates
high-accuracy voltage detection circuits and delay circuits.
Short-circuits between cells accommodate series connection of two cells or three cells.
The S-8223B/D Series limits its CO pin output voltage to 11.5 V max., so a FET with the gate withstand voltage of 12 V can be
used.
Features
High-accuracy voltage detection circuit for each cell
Overcharge detection voltage n (n = 1 to 3)
3.600 V to 4.700 V (50 mV step)
Accuracy ±20 mV (Ta = +25°C)
Overcharge hysteresis voltage n (n = 1 to 3)*1
Accuracy ±25 mV (Ta = 10°C to +60°C)
0.0 mV to 550 mV (50 mV step)
300 mV to 550 mV
Accuracy ±20%
100 mV to 250 mV
Accuracy ±50 mV
50 mV
Accuracy ±25 mV
0.0 mV
Accuracy 25 mV to +20 mV
Delay times for overcharge detection are generated only by an internal circuit (external capacitors are unnecessary)
Overcharge detection delay time is selectable:
1 s, 2 s, 4 s, 6 s, 8 s
Overcharge release delay time is selectable:
2 ms, 64 ms
Built-in timer reset delay circuit
Output form is selectable (S-8223A/C Series):
CMOS output, Nch open-drain output
Output logic is selectable (S-8223A/C Series):
Active "H", active "L"
CO pin output voltage is limited to 11.5 V max. (S-8223B/D Series)*2
High-withstand voltage:
Absolute maximum rating 28 V
Wide operation voltage range:
3.6 V to 28 V
Wide operation temperature range:
Ta = 40°C to +85°C
Low current consumption
During operation (VCU 1.0 V for each cell):
0.25 μA typ., 0.5 μA max. (Ta = +25°C)
During overdischarge (VCU × 0.5 V for each cell):
Lead-free (Sn 100%), halogen-free
0.3 μA max. (Ta = +25°C)
*1. Select the overcharge hysteresis voltage calculated as the following formula.
(Overcharge detection voltage n) + (Overcharge hysteresis voltage n) 3.4 V
*2. Only output logic active "H" is available.
Application
Lithium-ion rechargeable battery packs (for secondary protection)
Package
SNT-6A
1



S-8223B
BATTERY PROTECTION IC FOR 2-SERIAL / 3-SERIAL CELL PACK (SECONDARY PROTECTION)
S-8223A/B/C/D Series
Rev.1.3_00
Block Diagrams
1. S-8223A/C Series
1. 1 CMOS output product
VDD
VC1
Overcharge detection
comparator 1
+
VC2
Overcharge detection
comparator 2
+
Control logic
Delay circuit
Oscillator
CO
VC3
Overcharge detection
comparator 3
+
VSS
Figure 1
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)