CMOS VOLTAGE REGULATOR
|Total Page||30 Pages|
|Features||Datasheet pdf S-1212B/D Series www.ablicinc.com © AB LIC Inc., 2015-2016 HIGH-WITHSTAND VOL TAGE LOW CURRENT CONSUMPTION LOW DROPOU T CMOS VOLTAGE REGULATOR Rev.3.0_01 Th e S-1212B/D Series, developed by using high-withstand voltage CMOS process tec hnology, is a positive voltage regulato r with a high-withstand voltage, low cu rrent consumption and high-accuracy out put voltage, and has a built-in ON / OF F circuit. The S-1212B/D Series operate s at the maximum operation voltage of 3 6 V and a low current consumption of 6. 5 A typ., and has a built-in low on- resistance output transistor which prov ides a very small dropout voltage and a large output current. Also, a built-in overcurrent protection circuit to limi.|
|Keywords||S-1212B, datasheet, pdf, ABLIC, CMOS, VOLTAGE, REGULATOR, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent|
© ABLIC Inc., 2015-2016
HIGH-WITHSTAND VOLTAGE LOW CURRENT CONSUMPTION
LOW DROPOUT CMOS VOLTAGE REGULATOR
The S-1212B/D Series, developed by using high-withstand voltage CMOS process technology, is a positive voltage regulator
with a high-withstand voltage, low current consumption and high-accuracy output voltage, and has a built-in ON / OFF
The S-1212B/D Series operates at the maximum operation voltage of 36 V and a low current consumption of 6.5 A typ.,
and has a built-in low on-resistance output transistor which provides a very small dropout voltage and a large output current.
Also, a built-in overcurrent protection circuit to limit overcurrent of the output transistor and a built-in thermal shutdown circuit
to limit heat are included.
Output voltage accuracy:
Built-in overcurrent protection circuit:
Built-in thermal shutdown circuit:
Built-in ON / OFF circuit:
Built-in discharge shunt circuit:
Operation temperature range:
Lead-free (Sn 100%), halogen-free
2.5 V to 16.0 V, selectable in 0.1 V step
3.0 V to 36 V
2.0% (Ta = 25C)
During operation: 6.5 A typ. (Ta = 25C)
During power-off: 0.1 A typ. (Ta = 25C)
Possible to output 250 mA (at VIN VOUT(S) 2.0 V)*1
A ceramic capacitor can be used. (1.0 F or more)
A ceramic capacitor can be used. (1.0 F to 100 F)
Limits overcurrent of output transistor.
Detection temperature 165C typ.
Ensures long battery life.
Discharges the electric charge of the output capacitor during power-off.
(RLOW = 70 k typ.)
Ta = 40°C to 105°C
*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
Constant-voltage power supply for industrial equipment
Constant-voltage power supply for home electric appliance