OPB660T

Slotted Optical Switch OPB660N, OPB660T Features:  Non-contact switching  Printed circuit board mounting  Enhanced signal to noise ratio  Gap 0.125” (3.18mm) wide and 0.345” (8.76mm) deep slot  Emitter Aperture 0.05” X 0.06” (1.27mm X 1.52mm),  Sensor Aperture 0.01” X 0.06” (0.25mm X 1.52mm) Description: Each OPB660 slotted optical switch consists of an infrared emitting diode and a NPN silicon phototransistor, combined with an enhanced low current roll-off that improves contrast ratio and provides immunity to background irradiance. Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and near-infrared light. Applications:  Non-contact transmissive object sensor  Assembly line automation  Machine automation  Machine safety Part  End of travel sensor Number  Door sensor OPB660N OPB660T LED Peak Wavelength 890 nm Slot Width / Aperture Lead Length / Sensor Depth Emitter/Sensor Spacing Rbe Transistor 0.125" / 0.345” 0.05" / 0.01" 0.100" / 0.320" (MIN) 23 14 Pin # 1 2 LED Anode Cathode Pin # Transistor 3 Collector 4 Emitter [ MILLIMETERS] DIMENSIONS ARE IN: INCHES General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton...