Fiber Optic Detector OPF430
Features:
• Electrically isolated metal can package • High speed, low capacitance • Metal ca...
Fiber Optic Detector OPF430
Features:
Electrically isolated metal can package High speed, low capacitance Metal can for improved noise immunity 100MHz operation minimum
Description:
The OPF430 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications.
The OPF430 is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns.
Applications:
Industrial Ethernet equipment Copper-to-fiber media conversion Intra system fiber optic links Video surveillance systems
RoHS
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc
DIMENSIONS ARE IN:
[MILLIMETERS] INCHES
TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com |
[email protected]
Rev E 09/2020 Page 1
Fiber Optic Detector OPF430
Electrical Specifications
Absolute Maximum Ratings (TA = 25 °C unless otherwise noted)
Storage Temperature Range Operating Temperature Range Lead Soldering Temperature(1) Continuous Power Dissipation(2) Maximum Reverse Voltage
-65 °C to +150 ...