Fiber Optic Detector
Fiber Optic Detector
OPF470
Features:
Electrically isolated plastic cap package High speed, low capacitance Design...
Description
Fiber Optic Detector
OPF470
Features:
Electrically isolated plastic cap package High speed, low capacitance Designed to self align in the 0.228 diameter bore of standard fiber optic
receptacles. Press fit simplified component installation 35MHz operation minimum
Description: The OPF470 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications.
The OPF470 is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns.
Applications:
Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems
RoHS
General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc
DIMENSIONS ARE IN:
[MILLIMETERS] INCHES
OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C 07/2018 Page 1
Fiber Optic Detector OPF470
Electrical Specifications
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage Temperature Range Operating Temperature Range Lead Soldering Tempera...
Similar Datasheet