TVS Diode
30KPA Series
TVS Diode
Axial Leaded – 30000W > 30KPA series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Appro...
Description
30KPA Series
TVS Diode
Axial Leaded – 30000W > 30KPA series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1)
PPPM
30
kW
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
8.0
W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
400
A
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RθJL
Typical Thermal Resistance Junction to Ambient RθJA
8.0 °C/W 40 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
Functional Diagram
Descriptions
The 30KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
30kW peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Glass passivated chip junction in P600 package
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC J...
Similar Datasheet