74HCT541

74HC541; 74HCT541 Octal buffer/line driver; 3-state Rev. 5 — 12 July 2021 Product data sheet 1. General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits Wide supply voltage range from 2.0 to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Non-Inverting outputs Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) Input levels: For 74HC541: CMOS levels For 74HCT541: TTL levels ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range 74HC541D -40 °C to +125 °C 74HCT541D 74HC541PW -40 °C to +125 °C 74HCT541PW Name SO20 TSSOP20 Description plastic small outline package; 20 leads; body width 7.5 mm plastic thin shrink small outline package; 20 leads; body width 4.4 mm Version SOT163-1 SOT360-1 Nexperia 4. Functional diagram 2 A0 3 A1 4 A2 5 A3 6 A4 A5 7 A6 8 A7 9 OE1 1 19 OE2 Fig. 1. Logic symbol Y0 18 Y1 17 Y2 16 Y3 15 Y4 14 Y5 13 Y6 12 Y...