ADD-ON BOARD. IE-1000 Datasheet

IE-1000 BOARD. Datasheet pdf. Equivalent


Digital View IE-1000
IMAGE ENHANCER ADD-ON BOARD
FOR 120Hz PANEL
Model: IE-1000
Part number : 417190021-3 or up
[Firmware version : V1.80.00]
INSTRUCTIONS
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
4. Assembly notes – Important information about system elements
6. Connection & Operation – How to use the IE-1000
8. Connectors, pinouts & jumpers – Essential connection information
13. Board dimensions
14. Troubleshooting
15. Specifications
16 Appendix I – Mapping definition
18. Warranty, Caution & Limitation of Liability, Trademarks
19. Contact details
It is essential that these instructions are read and understood before connecting or
powering up the IE-1000
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.4: 26 March, 2009 (IE-1000 -2X manual.doc)
Page 1 of 19


IE-1000 Datasheet
Recommendation IE-1000 Datasheet
Part IE-1000
Description IMAGE ENHANCER ADD-ON BOARD
Feature IE-1000; IMAGE ENHANCER ADD-ON BOARD FOR 120Hz PANEL Model: IE-1000 Part number : 417190021-3 or up [Firmware.
Manufacture Digital View
Datasheet
Download IE-1000 Datasheet




Digital View IE-1000
Introduction
The IE-1000 is a Digital View add-on board providing:
10 bit panel support and 120Hz panel support with motion compensation frame interpolation
for smoother motion
The IE-1000 can currently be matched with the Digital View SVH-1920 and upcoming SVX-1920
controllers to provide support for:
Displays up to 1920x1200, 10 bit, 120Hz.
HOW TO PROCEED
As most panels require different connection settings and cables it is important to have the
relevant Digital View Connection Diagram before assembly begins. This is obtainable from
the Digital View website as follows:
Controller Solution Generator
A web based resource matching controllers & panels with connection diagrams
for download. Visit : http://www.digitalview.com/controllers/csg.php
Ensure all parts are on hand.
Check controller and add-on board switch & jumper settings (errors may damage the panel)
Prepare the source
Connect the parts
Understand the operation & functions
IMPORTANT USAGE NOTE
This equipment is for use by system manufacturers, developers and qualified integrators, the
manufacturer accepts no liability for damage or injury caused by the use of this product. It is
the responsibility of the developer, integrators or other user of this product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.4: 26 March, 2009 (IE-1000 -2X manual.doc)
Page 2 of 19



Digital View IE-1000
SYSTEM DESIGN
A typical LCD based display system utilizing the IE-1000 is likely to comprise the following:
Summary:
1.
2.
3.
4.
5.
6.
7.
8.
9.
LCD panel
Image Enhancer board, IE-1000
LCD controller card
Interconnect LVDS cable (P/N 426497600-3, 200mm)
Panel power cable (if required)
Panel cable for LVDS panel
RS-232 interface (for firmware upgrade only)
+12V / +24V DC power input
Power and inverter control cable
Digital View provides a range of parts, such as listed above, to make up complete display solutions.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.4: 26 March, 2009 (IE-1000 -2X manual.doc)
Page 3 of 19







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)