Adaptor Board. HVD-1000 Datasheet

HVD-1000 Board. Datasheet pdf. Equivalent

HVD-1000 Datasheet
Recommendation HVD-1000 Datasheet
Part HVD-1000
Description Analog Video To Digital Adaptor Board
Feature HVD-1000; Analog Video To Digital Adaptor Board Model: AVD-1000 P/N: 41601872X-3 HVD-1000 P/N: 41601883X-3 INS.
Manufacture Digital View
Datasheet
Download HVD-1000 Datasheet




Digital View HVD-1000
Analog Video To Digital Adaptor Board
Model: AVD-1000 P/N: 41601872X-3
HVD-1000 P/N: 41601883X-3
INSTRUCTIONS
CONTENTS
Page: 2. Introduction
4. Diagram for connectors
5. System Design
6. Board Dimension
7. Summary for Jumper settings
8. Summary of Pin Outs
11 Appendix I Mode Support Table
12.Appendix II - RS-232 control protocols
13.Appendix III AVD-1000 connect with SVX-1920v3
15. WARRANTY
16. Contact Details
17. Revision history
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd Doc Ver 1.1: May, 2015 (AVD-1000/HVD-1000_manual.doc)
Page 1 of 17



Digital View HVD-1000
Introduction
AVD-1000
AVD-1000 is designed to select one of analog video input sources (Composite, S-Video and
SD component) and convert to digital format, HDMI and TTL (To be supported)
AVD-1000 can be used independently without connecting with DV controller.
It could be an add-on board for Digital View controllers (eg. connect with SVX1920v3)
to provide composite , S-Video and SD component input
The video input sources can be selected through the on board tact switch and RS-232
interface. The active video source is indicated on the LED beside each video input
connector.
Video Inputs Signal Format
- NTSC (M, J, 4.43)
- PAL (M, BDGHI, Nc, 60)
Video Output Signal Format:
- HDMI
- TTL (To be supported)
Specifications subject to change without notice
© Digital View Ltd Doc Ver 1.1: May, 2015 (AVD-1000/HVD-1000_manual.doc)
Page 2 of 17



Digital View HVD-1000
On board LED is located beside each video input connector. It turns on when the source is
selected. If no video signal is present in the selected source, the LED blinks.
Video inputs can be selected by:
On board tact switch to toggle from one input to another one sequentially.
RS-232 commands
The last selected video input source will be memorized after power cycle.
HVD-1000
Harsh Environment version of the HVD-1000, provides full AVD-1000 feature set, plus wide
range operating temperature; shock and vibration tolerance and conformal coating for
protection against humidity and dusty. The operating temperature range of HVD-1000 is
from -40oC to +80oC * .
* Overall suitability for usage in critical applications must be independently tested and verified by the user.
Specifications subject to change without notice
© Digital View Ltd Doc Ver 1.1: May, 2015 (AVD-1000/HVD-1000_manual.doc)
Page 3 of 17







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)