INTERFACE CONTROLLER. SP-1920 Datasheet

SP-1920 CONTROLLER. Datasheet pdf. Equivalent


Digital View SP-1920
PC, DVI, HDMI, VIDEO, Component INTERFACE CONTROLLER
FOR TFT PANEL
Model: SP-1920
Part number : 4176000XX-3 or up
INSTRUCTIONS
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
4. Assembly notes – Important information about system elements
6. Connection & Operation – How to use the controller
10. Connectors, pinouts & jumpers – Essential connection information
23. Controller dimensions
24. Application notes
26. Troubleshooting
27. Specifications
28. Appendix I – Supported graphics modes table
31. Appendix II – RS-232 control protocols
38. Appendix III – Mapping definition
42. Appendix IV – DV remote control unit work for SP-1920
43. Appendix V - Media Failover Function
44. Warranty, Caution & Limitation of Liability, Trademarks
45. Contact details
46. Revision History
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 2.04 : 27 Feb, 2018 (SP-1920_manual.doc)
Page 1 of 46


SP-1920 Datasheet
Recommendation SP-1920 Datasheet
Part SP-1920
Description Component INTERFACE CONTROLLER
Feature SP-1920; PC, DVI, HDMI, VIDEO, Component INTERFACE CONTROLLER FOR TFT PANEL Model: SP-1920 Part number : 4176.
Manufacture Digital View
Datasheet
Download SP-1920 Datasheet




Digital View SP-1920
Introduction
Designed for LCD monitor and other flat panel display applications, the SP-1920 is a feature rich interface controller
for :
TFT (active matrix) LCD panels of up to 1920x1200 resolutions.
Support true 10 bits panel.
Computer video signals of VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA standard.
Support 2 x HDMI, DVI , VGA input support up to 1920x1200 60Hz input signals
Support Component and 2 x Composite Video signals input of NTSC, PAL and SECAM standard.
Ordering information :
Controller
Part number
SP-1920
P/N 41760001X-3
Ordering part number
P/N 4176000XX-3
HOW TO PROCEED
Ensure you have all parts & that they are correct, refer to:
Connection diagram
Controller Solution Generator
Full web resource matching controllers & panels with connection diagrams for download.
See at : http://www.digitalview.com/controllers/csg.php
Connector reference (in following section)
Assembly notes (refer to page 4 – 5)
Check controller switch & jumper settings (errors may damage the panel)
Prepare the PC
Connect the parts
Understand the operation & functions
IMPORTANT USAGE NOTE
This equipment is for use by developers and integrators, the manufacturer accepts no liability for damage or injury
caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to:
Ensure that all necessary and appropriate safety measures are taken.
Obtain suitable regulatory approvals as may be required.
Check power settings to all component parts before connection.
DISCLAIMER
There is no implied or expressed warranty regarding this material.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 2.04 : 27 Feb, 2018 (SP-1920_manual.doc)
Page 2 of 46



Digital View SP-1920
SYSTEM DESIGN
A typical LCD based display system utilizing this controller is likely to comprise the following:
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 2.04 : 27 Feb, 2018 (SP-1920_manual.doc)
Page 3 of 46







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)