4+2 CH serial input motor driver IC
Global Mixed-mode Technology Inc.
G2008
4+2 CH serial input motor driver IC for DSC
Features
Built in 4+1 full-swing ...
Description
Global Mixed-mode Technology Inc.
G2008
4+2 CH serial input motor driver IC for DSC
Features
Built in 4+1 full-swing drivers switched by serial control with brake function Built in 1 constant current drivers for shutter or IRIS Low on-resistance (1.2Ω, sum of on-resistance of upside and bottom side). Output current : IOUT<=0.8A(max.) for each
channel Build-in thermal shutdown (TSD, 150°C) CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase Built in exclusive control mode: CH13/23 (for STM-B) the combination control mode of 5CH is set Built in exclusive control mode: CH35 (for DCM), the combination control mode of 6CH is set All power supply systems (VCC, VM12, VM345) can be set up with an independent power supply Power save mode corresponds by serial control setup PI (photo interrapter drive) 3 channel built-in PR Comparator 2 channel built-in. Small 28QFN (4×4mm) is adopted.
General Description
G2008 is a 4+2 channel H-Bridge motor drivers IC for the digital camera and...
Similar Datasheet