for robot. MTXC-5034P Datasheet

MTXC-5034P robot. Datasheet pdf. Equivalent

MTXC-5034P Datasheet
Recommendation MTXC-5034P Datasheet
Part MTXC-5034P
Description Welding torch for pull feeding unit for robot
Feature MTXC-5034P; DAIHEN Welding torch for pull feeding unit     for robot (Built-in shock sensor) CO2 /MAG M.
Manufacture DAIHEN
Datasheet
Download MTXC-5034P Datasheet




DAIHEN MTXC-5034P
DAIHEN Welding torch for pull feeding unit 
   for robot (Built-in shock sensor)
CO2 /MAG
MTXC-3534P
MTXC-5034P
MTXCB-3534P
MTXCW-5034P
Instruction Manual
= Safety and Operation =
First thoroughly read this
manual to operate the machine
correctly.
Installation, maintenance, and repair of this
welding torch should be made by qualified
persons or persons who fully understand
welding machines for extra safety.
Operation of this welding torch should be
made by persons who have knowledge and
technical skill to understand the contents of
this manual well and handle the machine safely
for extra safety.
Regarding safety education, utilize courses and
classes held by head/branch offices of the
Welding Society/Association and the related
societies/associations and qualifying
examinations for welding experts/consultant
engineers.
After thoroughly reading this manual first,
store it with the warranty in the place where
the persons concerned can read at any time.
Read it again as occasion demands.
If incomprehensible, contact our offices. For
servicing, contact our local distributor or sales
representatives in your country. Our
addresses and telephone numbers are listed in
the back cover of this Instruction Manual.
Instruction Manual No.
1L7581-E-1
Contents
 NOTES ON SAFETY ......................... S1
 PRECAUTIONS FOR SAFETY ......... S2
 PRECAUTIONS IN OPERATING ..... S6
1. Specifications.................................... 1
2.Checking contents of package ............ 6
2.1 Checking contents of package ........... 6
2.2 Standard assembly ........................ 7
3. Mounting and Adjusting Procedure for
Welding Torch................................... 8
3.1 Mounting Torch (Mounting Bracket) and Pull
feeding unit ...................................... 8
Mounting Torch Gauge ....................... 9
Adjustment Procedure for Torch ........... 10
3.4 Connection Procedure for Water-Cooled
Torch (MTXCW-5034P)................................ 10
4. 4. Setting of Robot Control ................11
4.1 Confirmation of Tool Parameter 11
4.2 Operation Check for Shock Sensor ..... 11
5. Trouble shooting .......................................... 12
6. Parts Change................................................. 13
6.1 Replacing Parts for Changed Wire Diameter
 
6.2 Parts Change Procedure 156.3 Handling
Instructions for Torch 167.
................................................Parts List
............................................................................. 17



DAIHEN MTXC-5034P
NOTES ON SAFETY
Notes on Safety
 Before operating this product, you should first thoroughly read this Instruction Manual to operate
the product correctly.
 Precautions in this Instruction Manual are described to prevent you and others from being injured
and suffering loss in your property by having the product operated correctly and safely.
 This welding torch is designed and manufactured in due consideration of safety, but you should
observe the handling precautions described in this Instruction Manual. If you fail to do so, there
may cause an accident resulting in serious injury or death.
 Various ranks of accidents resulting in injury, death or damage may be caused by the mishandling
of devices. The following safety alert symbols and signal words are used throughout this manual
to identify various hazards and special instructions.
DANGER
: Mishandling may create seriously dangerous situation that could
cause serious injury or death to personnel. Limited situation of
great urgency.
WARNING
: Mishandling may create a dangerous situation that could cause
serious injury or death to personnel.
CAUTION
: Mishandling may create a dangerous situation that could cause
medium or slight injury to personnel, or material damage.
Hazards and special instructions identified by
CAUTION are very important as well
because neglecting them may occasionally cause serious injury or death to personnel. Do follow the
instructions identified by all three safety alert symbols and signal words because they are all very
important.
The meanings of "serious injury", "medium or slight injury" and "material damage" are as follows.
Serious injury
Medium or slight injury
Material damage

 Injury with a sequela due to a loss of eyesight, injury, burn (high
temperature and low temperature), electric shock, a bone fracture,
poisoning and so on as well as injury that requires hospital treatment
or long treatment as an outpatient.
 Injury, burn, electric shock and so on that require no hospital
treatment nor long treatment as an outpatient.
 Damage to property, and direct and incidental / consequential
damage due to the damage to devices.
Ref.:
IMPORTANT : IMPORTANT statements identify special instructions necessary for
the most efficient operation.
1



DAIHEN MTXC-5034P
IMPORTANT SAFEGUARD
Precautions for Safety
2.1 Read, understand, and comply with all safety rules described at the beginning of
the welding power source manual in addition to the following before initiating arc
welding operations.
WARNIN
G
 Observe the following to prevent a serious accident that results in
a serious injury or a death

1) This welding torch is designed and manufactured in due consideration of safety, but you should
observe the handling precautions described in this Instruction Manual. If you fail to do so, there
may occur an accident resulting in a serious injury or a death.
2) Related laws and regulations and your company's standards should be observed in
constructing input power source, selecting an installation area, handling/storing/piping high
pressure gas, storing welded products, and disposing wastes.
3) Keep out of the moving zone of a welding machine and the welding area.
4) A person with a pacemaker should not go near the operating welding machine and the welding
area unless his or her doctor permits. A welding machine generates a magnetic field around it
during powered, and that will have a bad effect on the pacemaker.
5) Installation, maintenance and repair of this welding torch should be done by qualified personnel
or those who fully understand a welding torch for further safety.
6) Operation of this welding torch should be done by personnel who have knowledge and technical
skill to be able to understand the contents of this manual well and to handle the wire feeding
reducer safely.
7) This welding torch must not be used for purposes other than welding.
2.2 Observe the following to prevent an electric shock.
WARNIN
G
 Do not touch live electrical parts .
 Touching live electrical parts can cause fatal shock or severe
burns.
1) Only qualified personnel should do the grounding work of the welding power source and a
workpiece, or a workpiece and powered peripheral jigs while abiding by domestic regulations.
2) Do not touch live electrical parts.
3) Always wear dry insulating gloves and other body protection. Do not wear torn or wet gloves
and work clothes.
4) Before doing the installation, inspection, maintenance, etc. of this product, be sure to turn off all
the input power sources and check, several minutes later, that there is no charging voltage
since the condenser and the like may have been recharged.
5) Do not use cables with insufficient capacity, with damage, or with naked conductors.
6) Be sure to tighten the connections of cables and insulate them in order to prevent personnel
from touching those parts easily.
7) DO NOT use a welding machine with its case or cover removed.
8) Secure a firm foothold before initiating work. DO NOT perform work with an unstable foothold
or with a foothold at a height of two meters or above.
9) Make periodic inspection and maintenance. Damaged parts should be repaired before use.
10) Turn off POWER switch when not in use.
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)