High-Performance Microcontrollers. PIC18LF47J13 Datasheet

PIC18LF47J13 Microcontrollers. Datasheet pdf. Equivalent

PIC18LF47J13 Datasheet
Recommendation PIC18LF47J13 Datasheet
Part PIC18LF47J13
Description High-Performance Microcontrollers
Feature PIC18LF47J13; PIC18F47J13 FAMILY PIC18F47J13 Family 28/44-Pin, High-Performance Microcontrollers with XLP Technol.
Manufacture Microchip
Datasheet
Download PIC18LF47J13 Datasheet




Microchip PIC18LF47J13
PIC18F47J13 FAMILY
PIC18F47J13 Family 28/44-Pin, High-Performance Microcontrollers
with XLP Technology
Power Management Features with XLP
for eXtreme Low Power:
• Deep Sleep mode: CPU Off, Peripherals Off, SRAM Off,
Currents Down to 9 nA and 700 nA with RTCC:
- Able to wake-up on external triggers, programmable WDT
or RTCC alarm
- Ultra Low-Power Wake-up (ULPWU)
• Sleep mode: CPU Off, Peripherals Off, SRAM On, Fast
Wake-up, Currents Down to 0.2 A, 2V Typical
• Idle: CPU Off, SRAM On, Currents Down to
1.7 A Typical
• Run: CPU On, SRAM On, Currents Down to
5.8 A Typical
• Timer1 Oscillator w/RTCC: 0.7 A, 32 kHz Typical
• Watchdog Timer: 0.33 A, 2V Typical
Flexible Oscillator Structure:
• Two External Clock modes, Up to 48 MHz (12 MIPS)
• Integrated Crystal/Resonator Driver
• Low-Power 31 kHz Internal RC Oscillator
• Tunable Internal Oscillator (31 kHz to 8 MHz,
±0.15% Typical, ±1% Max.)
• Precision 48 MHz PLL or 4x PLL Options
• Low-Power Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor (FSCM):
- Allows for safe shutdown if any clock stops
• Programmable Reference Clock Output Generator
Peripheral Highlights:
• Peripheral Pin Select:
- Allows independent I/O mapping of many peripherals
- Continuous hardware integrity checking and safety
interlocks prevent unintentional configuration changes
• Hardware Real-Time Clock/Calendar (RTCC):
- Provides clock, calendar and alarm functions
• High-Current Sink/Source 25 mA/25mA
(PORTB and PORTC)
• Four Programmable External Interrupts
• Four Input Change Interrupts
• Three Enhanced Capture/Compare/PWM
(ECCP) modules:
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
- Pulse steering control
Peripheral Highlights (cont.):
• Seven Capture/Compare/PWM (CCP) modules
• Two Master Synchronous Serial Port (MSSP) modules
featuring:
- 3-wire SPI (all 4 modes)
- SPI Direct Memory Access (DMA) channel
w/1024 byte count
- I2C Master and Slave modes
• 8-Bit Parallel Master Port/Enhanced Parallel Slave Port
• Three Analog Comparators with Input Multiplexing
• 12-Bit Analog-to-Digital (A/D) Converter module:
- Up to 13 input channels
- Auto-acquisition capability
- 10-bit mode for 100 ksps conversion speed
- Conversion available during Sleep
• High/Low-Voltage Detect module
• Charge Time Measurement Unit (CTMU):
- Provides a precise resolution time measurement
for both flow measurement and simple temperature
sensing
- Supports capacitive touch sensing for touch
screens and capacitive switches
• Two Enhanced USART modules:
- Supports RS-485, RS-232 and LIN/J2602
- Auto-wake-up on Start bit
- Auto-Baud Detect (ABD)
Special Microcontroller Features:
• 5.5V Tolerant Inputs (digital only pins)
• Low-Power, High-Speed CMOS Flash Technology
• C Compiler Optimized Architecture for Re-Entrant Code
• Priority Levels for Interrupts
• Self-Programmable under Software Control
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
• Single-Supply In-Circuit Serial Programming™ (ICSP™)
via Two Pins
• In-Circuit Debug (ICD) with 3 Breakpoints via Two Pins
• Operating Voltage Range of 2.0V to 3.6V
• On-Chip 2.5V Regulator
• Flash Program Memory of 10,000 Erase/Write Cycles
Minimum and 20-Year Data Retention
2010-2017 Microchip Technology Inc.
DS30009974C-page 1



Microchip PIC18LF47J13
PIC18FX7J13
TABLE 1: PIC18F47J13 FAMILY TYPES
PIC18F
Device
MSSP
SPI
w/DMA
PIC18F26J13 28 64K 3760 19 4/4 3/7 2 2 Y Y 10 3 Y N Y Y
PIC18F27J13 28 128K 3760 19 4/4 3/7 2 2 Y Y 10 3 Y N Y Y
PIC18F46J13 44 64K 3760 25 4/4 3/7 2 2 Y Y 13 3 Y Y Y Y
PIC18F47J13 44 128K 3760 25 4/4 3/7 2 2 Y Y 13 3 Y Y Y Y
PIC18LF26J13 28 64K 3760 19 4/4 3/7 2 2 Y Y 10 3 N N Y Y
PIC18LF27J13 28 128K 3760 19 4/4 3/7 2 2 Y Y 10 3 N N Y Y
PIC18LF46J13 44 64K 3760 25 4/4 3/7 2 2 Y Y 13 3 N Y Y Y
PIC18LF47J13 44 128K 3760 25 4/4 3/7 2 2 Y Y 13 3 N Y Y Y
2010-2017 Microchip Technology Inc.
DS30009974C-page 2



Microchip PIC18LF47J13
Pin Diagrams
44-Pin TQFP
PIC18FX7J13
= Pins are up to 5.5V tolerant
RC7/CCP10/PMA4/RX1/DT1/RP18
RD4/PMD4/RP21
RD5/PMD5/RP22
RD6/PMD6/RP23
RD7/PMD7/RP24
VSS1
VDD1
RB0/AN12/C3IND/INT0/RP3
RB1/AN10/C3INC/PMBE/RTCC/RP4
RB2/AN8/C2INC/CTED1/PMA3/REFO/RP5
RB3/AN9/C3INA/CTED2/PMA2/RP6
1 33
2 32
3 31
4 30
5 29
6 PIC18F4XJ13 28
7 27
8 26
9 25
10 24
11 23
NC
RC0/T1OSO/T1CKI/RP11
OSC2/CLKO/RA6
OSC1/CLKI/RA7
VSS2
VDD2
RE2/AN7/PMCS
RE1/AN6/PMWR
RE0/AN5/PMRD
RA5/AN4/C1INC/SS1/HLVDIN/RP2
VDDCORE/VCAP
Legend:
RPn represents remappable pins.Some input and output functions are routed through the Peripheral Pin
Select (PPS) module and can be dynamically assigned to any of the RPn pins. For a list of the input and
output functions, see Table 10-13 and Table 10-14, respectively. For details on configuring the PPS module,
see Section 10.7 “Peripheral Pin Select (PPS)”.
2010-2017 Microchip Technology Inc.
DS30009974C-page 3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)