DatasheetsPDF.com

PIC24FJ1024GA610 Dataheets PDF



Part Number PIC24FJ1024GA610
Manufacturers Microchip
Logo Microchip
Description 16-Bit Microcontrollers
Datasheet PIC24FJ1024GA610 DatasheetPIC24FJ1024GA610 Datasheet (PDF)

PIC24FJ1024GA610/GB610 FAMILY 16-Bit Microcontrollers with Large, Dual Partition Flash Program Memory and USB On-The-Go (OTG) High-Performance CPU • Modified Harvard Architecture • Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications • 32 Kbytes SRAM for All Part Variants • Up to 16 MIPS Operation @ 32 MHz • 8 MHz Fast RC Internal Oscillator: - 96 MHz PLL option - Multiple clock divide options - Run-time self-calibration capability for maintaining better th.

  PIC24FJ1024GA610   PIC24FJ1024GA610


Document
PIC24FJ1024GA610/GB610 FAMILY 16-Bit Microcontrollers with Large, Dual Partition Flash Program Memory and USB On-The-Go (OTG) High-Performance CPU • Modified Harvard Architecture • Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications • 32 Kbytes SRAM for All Part Variants • Up to 16 MIPS Operation @ 32 MHz • 8 MHz Fast RC Internal Oscillator: - 96 MHz PLL option - Multiple clock divide options - Run-time self-calibration capability for maintaining better than ±0.20% accuracy - Fast start-up • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier • 32-Bit by 16-Bit Hardware Divider • 16-Bit x 16-Bit Working Register Array • C Compiler Optimized Instruction Set Architecture • Two Address Generation Units for Separate Read and Write Addressing of Data Memory Universal Serial Bus Features • USB v2.0 On-The-Go (OTG) Compliant • Dual Role Capable – Can Act as Either Host or Peripheral • Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode • Full-Speed USB Operation in Device mode • High-Precision PLL for USB • USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required • Supports up to 32 Endpoints (16 bidirectional): - USB module can use any RAM location on the device as USB endpoint buffers • On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver • Supports Control, Interrupt, Isochronous and Bulk Transfers • On-Chip Pull-up and Pull-Down Resistors Analog Features • 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter: - 12-bit conversion rate of 200 ksps - Auto-scan and threshold compare features - Conversion available during Sleep • Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration • Charge Time Measurement Unit (CTMU): - Used for capacitive touch sensing, up to 24 channels - Time measurement down to 100 ps resolution Low-Power Features • Sleep and Idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up • Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals • Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction • Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation Special Microcontroller Features • Large, Dual Partition Flash Program Array: - Capable of holding two independent software applications, including bootloader - Permits simultaneous programming of one partition while executing application code from the other - Allows run-time switching between Active Partitions • 10,000 Erase/Write Cycle Endurance, Typical • Data Retention: 20 Years Minimum • Self-Programmable under Software Control • Supply Voltage Range of 2.0V to 3.6V • Operating Ambient Temperature from -40°C to +85°C for Industrial and from -40°C to +125°C for Extended Temperature Range Devices • On-Chip Voltage Regulators (1.8V) for Low-Power Operation • Programmable Reference Clock Output • In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via Two Pins • JTAG Boundary Scan Support • Fail-Safe Clock Monitor Operation: - Detects clock failure and switches to on-chip, low-power RC Oscillator • Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Programmable High/Low-Voltage Detect (HLVD) • Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation  2015-2019 Microchip Technology Inc. DS30010074G-page 1 PIC24FJ1024GA610/GB610 FAMILY Peripheral Features • Peripheral Pin Select (PPS) – Allows Independent I/O Mapping of Many Peripherals • Up to Five External Interrupt Sources • Configurable Interrupt-on-Change on All I/O Pins: - Each pin is independently configurable for rising edge or falling edge change detection • Eight-Channel DMA Supports All Peripheral modules: - Minimizes CPU overhead and increases data throughput • Five 16-Bit Timers/Counters with Prescalers: - Can be paired as 32-bit timers/counters • Six Input Capture modules, Each with a Dedicated 16-Bit Timer • Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer • Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs): - Independent 16/32-bit time base for each module - Internal time base and period registers - Legacy PIC24F Capture and Compare modes (16 and 32-bit) - Special Variable Frequency Pulse and Brushless DC Motor Output modes • Enhanced Parallel Master/Slave Port (EPMP/EPSP) • Hardware Real-Time Clock/Calendar (RTCC) with Timestamping • Three 3-Wire/4-Wire SPI modules: - Support four Frame modes - Eight-level FIFO buffer - Support I2S operation • Three I2C modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing • Six UART modules: - Support RS-485, RS-232 and LIN/J2602 - On-chip hardware encoder/decoder for Ir.


PIC24FJ512GA610 PIC24FJ1024GA610 PIC24FJ128GB606


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)