DatasheetsPDF.com

Power Controller. UCS1003-1 Datasheet

DatasheetsPDF.com

Power Controller. UCS1003-1 Datasheet






UCS1003-1 Controller. Datasheet pdf. Equivalent




UCS1003-1 Controller. Datasheet pdf. Equivalent





Part

UCS1003-1

Description

USB Port Power Controller



Feature


UCS1003-1/2/3 USB Port Power Controller with Charger Emulation Features • Po rt Power Switch with Two Current Limit Behaviors: - 2.9V to 5.5V source voltag e range - Up to 3.0A current (2.85A typ ical) with 55 m on resistance - Over current trip or Constant-Current Limiti ng - Soft turn-on circuitry - Selectabl e current limit - UCS1003-1 has program mable current limit vi.
Manufacture

Microchip

Datasheet
Download UCS1003-1 Datasheet


Microchip UCS1003-1

UCS1003-1; a the SMBus 2.0/I2C protocol - Dynamic t hermal management - Undervoltage Lockou t (UVLO) and Overvoltage Lockout (OVLO) - Backdrive, back-voltage protection - Latch or auto-recovery (low test curre nt) Fault handling - Selectable active- high or active-low power switch enable - BC1.2 VBUS discharge port renegotiati on function • Selectable/Automatic Cy cling of Universal S.


Microchip UCS1003-1

erial Bus (USB) Data Line Charger Emulat ion Profiles: - USB-IF BC1.2 Charging D ownstream Port (CDP) and Dedicated Char ging Port (DCP) modes, Chinese Telecomm unications Industry Standard YD/T 1591- 2009 and most Apple® Inc., Samsung and RIM® protocols st .


Microchip UCS1003-1

.

Part

UCS1003-1

Description

USB Port Power Controller



Feature


UCS1003-1/2/3 USB Port Power Controller with Charger Emulation Features • Po rt Power Switch with Two Current Limit Behaviors: - 2.9V to 5.5V source voltag e range - Up to 3.0A current (2.85A typ ical) with 55 m on resistance - Over current trip or Constant-Current Limiti ng - Soft turn-on circuitry - Selectabl e current limit - UCS1003-1 has program mable current limit vi.
Manufacture

Microchip

Datasheet
Download UCS1003-1 Datasheet




 UCS1003-1
UCS1003-1/2/3
USB Port Power Controller with Charger Emulation
Features
• Port Power Switch with Two Current Limit Behaviors:
- 2.9V to 5.5V source voltage range
- Up to 3.0A current (2.85A typical) with 55 m
on resistance
- Overcurrent trip or Constant-Current Limiting
- Soft turn-on circuitry
- Selectable current limit
- UCS1003-1 has programmable current limit via
the SMBus 2.0/I2C protocol
- Dynamic thermal management
- Undervoltage Lockout (UVLO) and Overvoltage
Lockout (OVLO)
- Backdrive, back-voltage protection
- Latch or auto-recovery (low test current) Fault handling
- Selectable active-high or active-low power
switch enable
- BC1.2 VBUS discharge port renegotiation function
• Selectable/Automatic Cycling of Universal Serial Bus
(USB) Data Line Charger Emulation Profiles:
- USB-IF BC1.2 Charging Downstream Port (CDP)
and Dedicated Charging Port (DCP) modes,
Chinese Telecommunications Industry Standard
YD/T 1591-2009 and most Apple® Inc.,
Samsung and RIM® protocols standard
- UCS1003-1 supports other charger emulation
profiles as defined via the SMBus 2.0/I2C protocol
- Supports 12W charging emulation
- USB 2.0 compliant high-speed data switch (in
Data Pass-Through, SDP and CDP modes)
- Nine preloaded charger emulation profiles for
maximum compatibility coverage of the
peripheral devices
- UCS1003-1 has one custom programmable
charger emulation profile for portable device
support for fully host-controlled charger emulation
• Supports Active Cables
• UCS1003-1 Supports Self-Contained Current Monitoring
and Rationing for Power Allocation Applications
• UCS1003-1 and UCS1003-3 have Low-Power
Attach Detection and Open-Drain (A_DET#) Pin
• UCS1003-2 has Charging Active (CHRG#)
Open-Drain Pin
• Ultra Low-Power Sleep State
• Optional Split Supply Support for VS and VDD for
Low Power in System Standby States
• Wake on Attach USB (UCS1003-1 and UCS1003-3)
• UCS1003-1 Supports SMBus 2.0/I2C Communications:
- Supports block write and read
- Multiple SMBus addresses
• Wide Operating Temperature Range: -40°C to +85°C
• IEC61000-4-2 8/15 kV Electrostatic Discharge (ESD)
Immunity
• UL Recognized and EN/IEC 60950-1 (CB) Certified
Description
The UCS1003-1/2/3 family of devices provides a USB
port power switch for precise control of up to 3.0A
continuous current (2.85A typical) with Overcurrent
Limit (OCL), dynamic thermal management, latch or
auto-recovery (low test current) Fault handling, select-
able active-high or active-low enable, Undervoltage
and Overvoltage Lockout, backdrive protection and
back-voltage protection.
Split supply support for VS and VDD is an option for low
power in system standby states. This gives battery-
operated applications (such as on-board computers) the
ability to detect attachments from a Sleep or OFF state.
After the Attach Detection is flagged, the system can
decide to wake-up and/or provide charging.
In addition to Power Switching and Current-Limiting
modes, the UCS1003-1/2/3 will automatically charge a
wide variety of portable devices, including USB-IF
BC1.2, YD/T-1591 (2009), most Apple Inc., Samsung,
RIM and many others. Nine preloaded charger emula-
tion profiles maximize the compatibility coverage of the
peripheral devices. Additionally, a customizable
charger emulation profile is available in UCS1003-1 to
accommodate unique existing and future portable
device handshaking/signature requirements.
The UCS1003-1 also provides current monitoring to
allow intelligent management of system power and
charge rationing for controlled delivery of current, regard-
less of the host power state. This is especially important
for battery-operated applications that want to provide
power and do not want to drain the battery excessively.
The UCS1003-1/2/3 family is available in a
4 mm x 4 mm 20-pin QFN package.
Applications
• Notebook and Netbook Computers
• Tablets and E-Book Readers
• Desktops and Monitors
• Docking Stations and Printers
• AC-DC Wall Adapters
2014-2015 Microchip Technology Inc.
DS20005346B-page 1




 UCS1003-1
UCS1003-1/2/3
Package Type
UCS1003-1
4x4 QFN*
UCS1003-2
4x4 QFN*
20 19 18 17 16
M1 1
15 DMIN
M2 2
VBUS1 3
EP 14 DPIN
21 13 ALERT#
VBUS2 4
12 SMCLK/S0
COMM_SEL/ILIM 5
11 SMDATA/LATCH
6 7 8 9 10
20 19 18 17 16
M1 1
15 DMIN
M2 2
VBUS1 3
EP 14 DPIN
21 13 ALERT#
VBUS2 4
12 S0
ILIM 5
11 LATCH
6 7 8 9 10
UCS1003-3
4x4 QFN*
20 19 18 17 16
M1 1
15 DMIN
M2 2
VBUS1 3
EP 14 DPIN
21 13 ALERT#
VBUS2 4
12 S0
ILIM 5
11 LATCH
6 7 8 9 10
* Includes Exposed Thermal Pad (EP); see Table 3-1.
DS20005346B-page 2
2014-2015 Microchip Technology Inc.




 UCS1003-1
Block Diagram
DPIN
DMIN
VDD
VS
GND
VDD
Attach Detector
UVLO,
OVLO
Power
Switch
Charger Control,
Measurement,
OCL
Temp
Note 1:
2:
3:
Available for UCS1003-1 only.
Available for UCS1003-2 only.
Available for UCS1003-3 only.
UCS1003-1/2/3
USB 2.0 HS Data Switch &
Charger Emulator
DPOUT
DMOUT
VBUS
VDD
Interface,
Logic
COMM_SEL(1)/ILIM
ALERT#
A_DET#(1,3)
CHRG#(2)
PWR_EN
SEL
EM_EN
M1
M2
SMCLK(1)/S0
SMDATA(1)/LATCH
2014-2015 Microchip Technology Inc.
DS20005346B-page 3



Recommended third-party UCS1003-1 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)