DatasheetsPDF.com

Fanout Buffer. PL135-27 Datasheet

DatasheetsPDF.com

Fanout Buffer. PL135-27 Datasheet






PL135-27 Buffer. Datasheet pdf. Equivalent




PL135-27 Buffer. Datasheet pdf. Equivalent





Part

PL135-27

Description

1:2 Oscillator Fanout Buffer



Feature


PL135-27 Low Power, 1.62V to 3.63V, 10MH z to 40MHz, 1:2 Oscillator Fanout Buffe r Revision 2.0 General Description The PL135-27 is an advanced oscillator fan out buffer design for high performance, low-power, small form-factor applicati ons. The PL135-27 accepts a fundamental crystal input of 10MHz to 40MHz and pr oduces two LVCMOS outputs of the same f requency. The PL13.
Manufacture

Micrel

Datasheet
Download PL135-27 Datasheet


Micrel PL135-27

PL135-27; 5-27 is designed to fit in a small 2mm 1.3mm DFN package and offers the best phase noise, jitter performance and lo west power consumption of any comparabl e IC. Datasheets and support documentat ion are available on Micrel’s web sit e at: www.micrel.com. Features • Adv anced oscillator design for wide freque ncy coverage • Two LVCMOS outputs • 8mA output drive strength .


Micrel PL135-27

• Input/output frequency: 10MHz to 40M Hz fundamental crystal • Very low jit ter and phase noise • Low current con sumption • Single 1.62V to 3.63V powe r supply • Available in 2.0mm × 1.3m m DFN-6L, GREEN/RoHS- compliant package Block Diagram .


Micrel PL135-27

.

Part

PL135-27

Description

1:2 Oscillator Fanout Buffer



Feature


PL135-27 Low Power, 1.62V to 3.63V, 10MH z to 40MHz, 1:2 Oscillator Fanout Buffe r Revision 2.0 General Description The PL135-27 is an advanced oscillator fan out buffer design for high performance, low-power, small form-factor applicati ons. The PL135-27 accepts a fundamental crystal input of 10MHz to 40MHz and pr oduces two LVCMOS outputs of the same f requency. The PL13.
Manufacture

Micrel

Datasheet
Download PL135-27 Datasheet




 PL135-27
PL135-27
Low Power, 1.62V to 3.63V, 10MHz to
40MHz, 1:2 Oscillator Fanout Buffer
Revision 2.0
General Description
The PL135-27 is an advanced oscillator fanout buffer
design for high performance, low-power, small form-factor
applications. The PL135-27 accepts a fundamental crystal
input of 10MHz to 40MHz and produces two LVCMOS
outputs of the same frequency. The PL135-27 is designed
to fit in a small 2mm × 1.3mm DFN package and offers the
best phase noise, jitter performance and lowest power
consumption of any comparable IC.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
Features
Advanced oscillator design for wide frequency coverage
Two LVCMOS outputs
8mA output drive strength
Input/output frequency: 10MHz to 40MHz fundamental
crystal
Very low jitter and phase noise
Low current consumption
Single 1.62V to 3.63V power supply
Available in 2.0mm × 1.3mm DFN-6L, GREEN/RoHS-
compliant package
Block Diagram
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
September 8, 2014
Revision 2.0
tcghelp@micrel.com or (408) 955-1690




 PL135-27
Micrel, Inc.
Ordering Information
Part Number
Ambient Temperature Range
PL135-27GC-R
0°C to +70°C
PL135-27GI-R
-40°C to +85°C
Note:
1. LLL designates lot number.
Pin Configuration
Marking(1)
J27
LLL
PL135-27
Package
6-Pin 2.0mm × 1.3mm DFN
Pin Description
Pin Number
DFN-6L
1
2
3
4
5
6
Pin Name
XIN
CLK1
GND
CLK0
VDD
XOUT
6-Lead DFN
Type
I
O
P
O
P
O
Pin Description
Crystal input
Clock output
GND connection
Clock output
VDD connection
Crystal output
September 8, 2014
2 Revision 2.0
tcghelp@micrel.com or (408) 955-1690




 PL135-27
Micrel, Inc.
PL135-27
Absolute Maximum Ratings(2)
Supply Voltage (VDD) .................................... –0.5V to +4.6V
Output Voltage (VOUT) ............................ –0.5V to VDD+0.5V
Storage Temperature (TS).........................–65°C to +150°C
Operating Ratings(3)
Supply Voltage (VDD)................................ +1.62V to +3.63V
Ambient Temperature (TA) .......................... –40°C to +85°C
AC Electrical Characteristics
VDD = 1.8V ±10%, 2.5V ±10% or 3.3V ±10%; CL = 15pF; TA = -40°C to +85°C, unless otherwise noted
Symbol Parameter
Condition
Min.
FX
tSETTLE
dF/dVDD
tR
tF
tSKEW
D-C
Crystal Input Frequency
Settling Time
VDD Sensitivity
Output Rise Time
Output Fall Time
Output to Output Skew
Duty Cycle
Fundamental crystal
At Power-Up (VDD > 1.62V)
Frequency vs. VDD, ±10%
10/90% VDD, VDD=3.3V
90/10% VDD, VDD=3.3V
10
-0.5
45
Notes:
2. Exceeding the absolute maximum ratings may damage the device.
3. The device is not guaranteed to function outside its operating ratings.
Typ.
2
2
50
Max.
40
2
0.5
3
3
500
55
Units
MHz
ms
ppm
ns
ns
ps
%
DC Electrical Characteristics
VDD = 1.8V ±10%, 2.5V ±10% or 3.3V ±10%; CL = 15pF; TA = -40°C to +85°C, unless otherwise noted
Symbol Parameter
Condition
Min.
VDD = 3.3V, 25MHz, No Load
IDD Supply Current, Dynamic VDD = 2.5V, 25MHz, No Load
VDD = 1.8V, 25MHz, No Load
VDD Operating Voltage
VOL Output Low Voltage
IOL = +4mA, 3.3V
VOH Output High Voltage
IOH = -4mA, 3.3V
IOSD Output Current
VOL = 0.4V, VOH = 2.4V
1.62
2.4
8
Typ.
1.6
1.2
0.9
Max.
3.63
0.4
Units
mA
mA
mA
V
V
V
mA
Crystal Specifications
VDD = 1.8V ±10%, 2.5V ±10% or 3.3V ±10%; CL = 15pF; TA = -40°C to +85°C, unless otherwise noted
Symbol Parameter
Condition
Min.
FXIN
Fundamental Crystal
Resonator Frequency
10
CL(xtal)
PD
Crystal Loading Rating
Operating Drive Level
C0 Shunt Capacitance
ESR
C0 ≤ 5.5pF
Effective Series Resistance
C0 ≤ 2.5pF
Typ.
12
0.1
Max.
40
2
5.5
40
60
Units
MHz
pF
mW
pF
September 8, 2014
3 Revision 2.0
tcghelp@micrel.com or (408) 955-1690



Recommended third-party PL135-27 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)