10/100 Mbps Ethernet End-Point Connection
KSZ8441HL/FHL
IEEE 1588v2 Precision Time Protocol-Enabled, 10/100 Mbps Ethernet End-Point Connection with 8- or 16-Bit H...
Description
KSZ8441HL/FHL
IEEE 1588v2 Precision Time Protocol-Enabled, 10/100 Mbps Ethernet End-Point Connection with 8- or 16-Bit Host Bus Interface
Features
Management Capabilities
Supports IP Header (IPv4)/TCP/UDP/ICMP Checksum Generation and Checking
Supports IPv6 TCP/UDP/ICMP Checksum Generation and Checking
Supports IEEE 802.3x Full-Duplex Flow Control and Half-Duplex Backpressure Collision Flow Control
MIB Counters for Fully Compliant Statistics Gathering: 34 Counters on the Ethernet Port, Port 1
Loopback Modes for Remote Failure Diagnostics
Robust Ethernet PHY Port
Integrated IEEE 802.3/802.3u-Compliant Ethernet Transceiver Supporting 10BASE-T and 100BASE-TX
Copper and Fiber Mode Support in the KSZ8441FHL
Copper Mode Support in the KSZ8441HL Auto-Negotiation: 10/100 Mbps, Full- and Half-
Duplex Adaptive Equalizer Baseline Wander Correction On-Chip Termination Resistors and Internal Bias-
ing for Differential Pairs to Reduce Power HP Auto...
Similar Datasheet