2.2 x 1.4 mm Surface Mount LED Lamp
The Blue source color devices are made with
InGaN Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
2.2 mm x 1.4 mm, 1.3 mm high
Low power consumption
Available on tape and reel
tPackage: 2000 pcs / reel
Moisture sensitivity level: 3
gHome and smart appliances
Wearable and portable devices
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Observe precautions for handling
electrostatic discharge sensitive devices
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
■ Blue (InGaN)
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAK3429 / 1201005898 Rev No: V.5B Date: 11/08/2017
Iv (mcd) @ 20mA 
Viewing Angle 
Page 1 / 4