Document
Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series
RoHS
Description
This 6 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays.
Sensitive type components guarantee gate control in Quadrants I & IV as needed for digital control circuitry.
Standard type components normally operate in Quadrants I & III triggered from AC line.
Alternistor type components only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability.
Agency Approval
Agency * - L Package Only
Agency File Number E71639*
Main Features
Symbol IT(RMS)
VDRM/ VRRM IGT (Q1)
Value 6
400, 600, 800 or 1000 5 to 50
Unit A V mA
Schematic Symbol
MT2
MT1
G
Additional Information
Features & Benefits
• RoHS-compliant
• Glass – passivated junctions
• Voltage capability up to 1000 V
• Surge capability up to 85 A
• The L-package has an isolation rating of 2500VRMS
• Solid-state switching eliminates arcing or contact bounce that create voltage transients
• No contacts to wear out from reaction of switching events
• Restricted (or limited) RFI generation, depending on activation point of sine wave
• Only requires a short gate activation pulse during each half-cycle
• UL Recognized as an Electrically Isolated Semiconductor Device to UL 1557.
Applications
Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances.
Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring the highest commutation performance.
Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.
Datasheet
Resources
Samples
© 2020 Littelfuse, Inc. Specifications are subject to change without notice.
Revised: BO.11/17/20
Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — Sensitive Triac (4 Quadrants)
Symbol
Parameter
IT(RMS)
RMS on-state current (full sine wave)
ITSM I2t
di/dt
IGTM PG(AV) Tstg
TJ
Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t Value for fusing
Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time Peak gate trigger current
Average gate power dissipation
Storage temperature range
Operating junction temperature range
Note: xx = voltage/10, y = sensitivity
Lxx06Ly/Lxx06Vy/Lxx06Dy Lxx06Ry/Lxx06Ny f = 50 Hz f = 60 Hz tp = 8.3 ms
f = 120 Hz
tp=20μs
TC = 80°C TC = 85°C t = 20 ms t = 16.7 ms
TJ = 110°C TJ = 110°C TJ = 110°C
Value
6
50 60 15
70
4 0.4 -40 to 150 -40 to 110
Unit
A
A A2s A/μs A W °C °C
Absolute Maximum Ratings — Standard Triac
Symbol
Parameter
IT(RMS)
RMS .