|
|
Sealed Optocouplers. HCPL-530K Datasheet |
|
|
| Part Number | HCPL-530K |
| Description | Intelligent Power Module and Gate Drive Interface Hermetically Sealed Optocouplers |
| Manufacture | Avago |
| Total Page | 16 Pages |
| PDF Download |
Intelligent Power Module and Gate Drive
Interface Hermetically Sealed Optocouplers
Data Sheet
HCPL-5300, HCPL-5301, HCPL-530K, 5962-96852
Description
The HCPL-530X devices consist of a GaAsP LED optically
coupled to an integrated high gain photo detector in a
hermetically sealed package. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from the DSCC Drawing 5962-96852. All devices are
manufactured and tested on a MIL-PRF-38534 certified line
and are included in the DSCC Qualified Manufacturers List
QML-38534 for Hybrid Microcircuits. Minimized
propagation delay difference between devices make these
optocouplers excellent solutions for improving inverter
efficiency through reduced switching dead time. An on
chip 20 kΩ output pull-up resistor can be enabled by
shorting output pins 6 and 7, thus eliminating the need
for an external pull-up resistor in common IPM applica-
tions. Specifications and performance plots are given for
typical IPM applications.
Features
• Performance specified over full military temperature
Range: -55°C to +125°C
• Fast maximum propagation delays
tPHL = 450 ns,
tPLH = 650 ns
• Minimized pulse width distortion (PWD = 450 ns)
• High common mode rejection (CMR): 10 kV/µs at
VCM = 1000 V
• CTR > 30% at IF = 10 mA
• 1500 Vdc withstand test voltage
• Manufactured and tested on a MIL-PRF-38534 certified
line
• Hermetically sealed packages
• Dual marked with device part number and DSCC
drawing number
• QML-38534, Class H and K
• HCPL-4506 function compatibility
Truth Table
LED
ON
OFF
VO
L
H
Schematic Diagram
Applications
• Military and space
• High reliability systems
• Harsh industrial environments
• Transportation, medical, and life critical systems
• IPM isolation
• Isolated IGBT/MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
18
20 kΩ
27
36
4
SHIELD
5
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent
damage and/or degradation which may be induced by ESD.
|
Selection Guide-Lead Configuration Options
Avago Part # and Options
Commercial
HCPL-5300
MIL-PRF-38534, Class H
MIL-PRF-38534, Class K
HCPL-5301
HCPL-530K
Standard Lead Finish
Solder Dipped*
Gold Plate
Option #200
Butt Cut/Gold Plate
Gull Wing/Soldered*
Option #100
Option #300
Class H SMD Part #
Prescript for all below
5962-
Either Gold or Solder
Gold Plate
9685201HPX
9685201HPC
Solder Dipped*
Butt Cut/Gold Plate
9685201HPA
9685201HYC
Butt Cut/Soldered*
Gull Wing/Soldered*
9685201HYA
9685201HXA
Class K SMD Part #
Prescript for all below
5962-
Either Gold or Solder
Gold Plate
9685201KPX
9685201KPC
Solder Dipped*
Butt Cut/Gold Plate
9685201KPA
9685201KYC
Butt Cut/Soldered*
Gull Wing/Soldered*
9685201KYA
9685201KXA
*Solder contains lead.
Outline Drawing
;;;;9.40(0.370)
9.91 (0.390)
0.76 (0.030)
1.27 (0.050)
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
3.81 (0.150)
MIN.
8.13 (0.320)
MAX.
7.16 (0.282)
7.57 (0.298)
0.20 (0.008)
0.33 (0.013)
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
7.36 (0.290)
7.87 (0.310)
2
|
| Features | Datasheet pdf Intelligent Power Module and Gate Drive Interface Hermetically Sealed Optocoupl ers Data Sheet HCPL-5300, HCPL-5301, HC PL-530K, 5962-96852 Description The HC PL-530X devices consist of a GaAsP LED optically coupled to an integrated high gain photo detector in a hermetically sealed package. The products are capabl e of operation and storage over the ful l military temperature range and can be purchased as either standard product o r with full MIL-PRF-38534 Class Level H or K testing or from the DSCC Drawing 5962-96852. All devices are manufacture d and tested on a MIL-PRF-38534 certifi ed line and are included in the DSCC Qu alified Manufacturers List QML-38534 fo r Hybrid Microcircuits. Minimized propa gation delay difference between devices make these optocouplers excellent solu tions for improving inverter efficiency through reduced switching dead time. A n on chip 20 kΩ output pull-up resist or can be enabled by shorting output pi ns 6 and 7, thus eliminating the need for an external pull-up r. |
| Keywords | HCPL-530K, datasheet, pdf, Avago, Intelligent, Power, Module, and, Gate, Drive, Interface, Hermetically, Sealed, Optocouplers, CPL-530K, PL-530K, L-530K, HCPL-530, HCPL-53, HCPL-5, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute |
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |