Gain Optocouplers. HCNW139 Datasheet

HCNW139 Datasheet PDF, Equivalent


Part Number

HCNW139

Description

High Gain Optocouplers

Manufacture

HP

Total Page 16 Pages
PDF Download
Download HCNW139 Datasheet PDF


HCNW139 Datasheet
Low Input Current, High Gain
Optocouplers
Technical Data
6N139
6N138
HCPL-0701 HCPL-0700
HCNW139 HCNW138
Features
• High Current Transfer Ratio
– 2000% Typical (4500%
Typical for HCNW139/138)
• Low Input Current
Requirements – 0.5 mA
• TTL Compatible Output –
0.1 V VOL Typical
• Performance Guaranteed
over Temperature 0°C
to 70°C
• Base Access Allows Gain
Bandwidth Adjustment
• High Output Current –
60 mA
• Safety Approval
UL Recognized – 2500 V rms
for 1 Minute and 5000 V rms*
for 1 Minute per UL 1577
CSA Approved
VDE 0884 Approved with
VIORM = 1414 V peak for
HCNW139 and HCNW138
BSI Certified (HCNW139 and
HCNW138)
• Available in 8-Pin DIP or
SOIC-8 Footprint or
Widebody Package
•MIL-STD-1772 Version
Available (HCPL-5700/1)
Applications
• Ground Isolate Most Logic
Families – TTL/TTL, CMOS/
TTL, CMOS/CMOS, LSTTL/
TTL, CMOS/LSTTL
• Low Input Current Line
Receiver
• High Voltage Insulation
(HCNW139/138)
• EIA RS-232C Line Receiver
• Telephone Ring Detector
• 117 V ac Line Voltage Status
Indicator – Low Input Power
Dissipation
• Low Power Systems –
Ground Isolation
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 VB
6 VO
5 GND
Description
These high gain series couplers
use a Light Emitting Diode and an
integrated high gain photodetec-
tor to provide extremely high
current transfer ratio between
input and output. Separate pins
for the photodiode and output
stage result in TTL compatible
saturation voltages and high
speed operation. Where desired
the VCC and VO terminals may be
tied together to achieve conven-
tional photodarlington operation.
A base access terminal allows a
gain bandwidth adjustment to be
made.
TRUTH TABLE
LED
ON
OFF
VO
LOW
HIGH
*5000 V rms/1 minute rating is for HCNW139/138 and Option 020 (6N139/138) products only.
A 0.1 µF bypass capacitor connected between pins 8 and 5 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.

HCNW139 Datasheet
2
The 6N139, HCPL-0701, and
CNW139 are for use in CMOS,
LSTTL or other low power appli-
cations. A 400% minimum current
transfer ratio is guaranteed over
0 to 70°C operating range for only
0.5 mA of LED current.
The 6N138, HCPL-0700, and
HCNW138 are designed for use
mainly in TTL applications.
Current Transfer Ratio (CTR) is
300% minimum over 0 to 70°C
for an LED current of 1.6 mA
(1 TTL Unit load ). A 300%
minimum CTR enables operation
with 1 TTL Load using a 2.2 k
pull-up resistor.
Selection for lower input current
down to 250 µA is available upon
request.
The HCPL-0701 and HCPL-0700
are surface mount devices
packaged in an industry standard
SOIC-8 footprint.
The SOIC-8 does not require
“through holes” in a PCB. This
package occupies approximately
one-third the footprint area of the
standard dual-in-line package.
The lead profile is designed to be
compatible with standard surface
mount processes.
The HCNW139 and HCNW138
are packaged in a widebody
encapsulation that provides creep-
age and clearance dimensions
suitable for safety approval by
regulatory agencies worldwide.
Selection Guide
8-Pin DIP
(300 Mil)
Dual
Single
Channel
Channel Package
Package
HCPL-
6N139
2731[1]
6N138
2730[1]
HCPL-4701[1] 4731[1]
Small Outline SO-8
Single
Dual
Channel Channel
Package Package
HCPL- HCPL-
0701
0731
0700
0730
070A[1]
073A[1]
Widebody
Package
(400 mil)
Single
Channel
Package
HCNW139
HCNW138
Minimum
Input ON
Current
(IF)
0.5 mA
1.6 mA
40 µA
0.5 mA
Minimum
CTR
Absolute
Maxi-
mum
VCC
400%
18 V
300%
7V
800%
18 V
300%
20 V
Hermetic
Single and
Dual
Channel
Packages
HCPL-
5701[1]
5700[1]
5731[1]
5730[1]
Note:
1. Technical data are on separate HP publications.


Features Datasheet pdf Low Input Current, High Gain Optocoupler s Technical Data 6N139 6N138 HCPL-07 01 HCPL-0700 HCNW139 HCNW138 Features • High Current Transfer Ratio – 20 00% Typical (4500% Typical for HCNW139/ 138) • Low Input Current Requirements – 0.5 mA • TTL Compatible Output 0.1 V VOL Typical • Performance Gu aranteed over Temperature 0°C to 70°C • Base Access Allows Gain Bandwidth Adjustment • High Output Current – 60 mA • Safety Approval UL Recognized – 2500 V rms for 1 Minute and 5000 V rms* for 1 Minute per UL 1577 CSA Appr oved VDE 0884 Approved with VIORM = 141 4 V peak for HCNW139 and HCNW138 BSI Ce rtified (HCNW139 and HCNW138) • Avail able in 8-Pin DIP or SOIC-8 Footprint o r Widebody Package •MIL-STD-1772 Vers ion Available (HCPL-5700/1) Applicatio ns • Ground Isolate Most Logic Famili es – TTL/TTL, CMOS/ TTL, CMOS/CMOS, L STTL/ TTL, CMOS/LSTTL • Low Input Cur rent Line Receiver • High Voltage Ins ulation (HCNW139/138) • EIA RS-232C Line Receiver • Telepho.
Keywords HCNW139, datasheet, pdf, HP, High, Gain, Optocouplers, CNW139, NW139, W139, HCNW13, HCNW1, HCNW, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)