DatasheetsPDF.com

SMAJ26A Dataheets PDF



Part Number SMAJ26A
Manufacturers Vishay
Logo Vishay
Description Transient Voltage Suppressors
Datasheet SMAJ26A DatasheetSMAJ26A Datasheet (PDF)

www.vishay.com SMAJ5.0A thru SMAJ188CA Vishay General Semiconductor Surface-Mount TRANSZORB® Transient Voltage Suppressors Cathode SMA (DO-214AC) Anode (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS VBR uni-directional VBR bi-directional VWM PPPM PD IFSM TJ max. Polarity 6.40 V to 231 V 6.40 V to 231 V 5.0 V to 188 V 400 W, 300 W 3.3 W 40 A 150 °C Unidirectional, bidirectional Package SMA (DO-214AC) DEVICES FOR BIDIRECTION APPL.

  SMAJ26A   SMAJ26A


Document
www.vishay.com SMAJ5.0A thru SMAJ188CA Vishay General Semiconductor Surface-Mount TRANSZORB® Transient Voltage Suppressors Cathode SMA (DO-214AC) Anode (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS VBR uni-directional VBR bi-directional VWM PPPM PD IFSM TJ max. Polarity 6.40 V to 231 V 6.40 V to 231 V 5.0 V to 188 V 400 W, 300 W 3.3 W 40 A 150 °C Unidirectional, bidirectional Package SMA (DO-214AC) DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional use CA suffix (e.g. SMAJ10CA). Electrical characteristics apply in both directions. TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. FEATURES • Low profile package Available • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) Available • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) Peak pulse current with a waveform (1) Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Operating junction and storage temperature range PPPM IPPM PD IFSM TJ, TSTG 400 See next table 3.3 40 -55 to +150 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 300 W above 78 V (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal UNIT W A W A °C Revision: 09-Jan-2024 1 Document Number: 88390 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com SMAJ5.0A thru SMAJ188CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE UNI BI BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C) (+)SMAJ5.0A (5) AE WE 6.40 7.07 10 5.0 800 (+)SMAJ6.0A AG WG 6.67 7.37 10 6.0 800 (+)SMAJ6.5A AK WK 7.22 7.98 10 6.5 500 (+)SMAJ7.0A AM WM 7.78 8.60 10 7.0 200 (+)SMAJ7.5A AP WP 8.33 9.21 1.0 7.5 100 (+)SMAJ8.0A AR WR 8.89 9.83 1.0 8.0 50 (+)SMAJ8.5A AT WT 9.44 10.4 1.0 8.5 10 (+)SMAJ9.0A AV WV 10.0 11.1 1.0 9.0 5.0 (+)SMAJ10A AX WX 11.1 12.3 1.0 10 1.0 (+)SMAJ11A AZ WZ 12.2 13.5 1.0 11 1.0 (+)SMAJ12A BE XE 13.3 14.7 1.0 12 1.0 (+)SMAJ13A BG XG 14.4 15.9 1.0 13 1.0 (+)SMAJ14A BK XK 15.6 17.2 1.0 14 1.0 (+)SMAJ15A BM XM 16.7 18.5 1.0 15 1.0 (+)SMAJ16A BP XP 17.8 19.7 1.0 16 1.0 (+)SMAJ17A BR XR 18.9 20.9 1.0 17 1.0 (+)SMAJ18A BT XT 20.0 22.1 1.0 18 1.0 (+)SMAJ20A BV XV 22.2 24.5 1.0 20 1.0 (+)SMAJ22A BX XX 24.4 26.9 1.0 22 1.0 (+)SMAJ24A BZ XZ 26.7 29.5 1.0 24 1.0 (+)SMAJ26A CE YE 28.9 31.9 1.0 26 1.0 (+)SMAJ28A CG YG 31.1 34.4 1.0 28 1.0 (+)SMAJ30A CK YK 33.3 36.8 1.0 30 1.0 (+)SMAJ33A CM YM 36.7 40.6 1.0 33 1.0 (+)SMAJ36A CP YP 40.0 44.2 1.0 36 1.0 (+)SMAJ40A CR YR 44.4 49.1 1.0 40 1.0 (+)SMAJ43A CT YT 47.8 52.8 1.0 43 1.0 (+)SMAJ45A CV YV 50.0 55.3 1.0 45 1.0 (+)SMAJ48A CX YX 53.3 58.9 1.0 48 1.0 (+)SMAJ51A CZ YZ 56.7 62.7 1.0 51 1.0 (+)SMAJ54A RE ZE 60.0 66.3 1.0 54 1.0 (+)SMAJ58A RG ZG 64.4 71.2 1.0 58 1.0 (+)SMAJ60A RK ZK 66.7 73.7 1.0 60 .


SMAJ24A SMAJ26A SMAJ28A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)