High Performance Amplifier
AM-146/AMC-146
High Performance Amplifier, 21 dB Gain, 10 - 500 MHz
Features
4 dB Typical Midband Noise Figure +38 d...
Description
AM-146/AMC-146
High Performance Amplifier, 21 dB Gain, 10 - 500 MHz
Features
4 dB Typical Midband Noise Figure +38 dBm Typical Midband Third Order Intercept +24 dBm Typical Midband 1 dB Compression
Description
M/A-COM’s AM-146 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes current in a high intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the metal flatpack the thermal rise minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-146 is ideally suited for use where a high intercept, high reliability amplifier is required.
FP-9
Rev. V3
C-25
Absolute Maximum Ratings 1
Parameter Max. Input Power
Vbias Operating Temperature Storage Temperature
Absolute Maximum +10 dBm +15.75 V
-55°C to +85°C -65°C to +125°C
1. Operation of this device above any one of these parameters may cause permanent damage.
Pin Configuration
P...
Similar Datasheet
- AM-1024600-070IP LCD - Amson
- AM-1024600B3TMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-T00H LCD - AMPIRE
- AM-1024600KTMQW-01H LCD - AMPIRE
- AM-1024600L2TMQW-00H LCD - AMP DISPLAY
- AM-1024600L3TMQW-T05H LCD - AMPIRE
- AM-1024768ETMCW-00 LCD - AMPIRE
- AM-1024768FTMQW-00H-F LCD - AMP DISPLAY
- AM-1024768G1TMQW-00H LCD - AMPIRE