Cascadable Thin Film Amplifier
AM-176 / AMC-176
Cascadable Thin Film Amplifier, 13 dB Gain, 5 - 1000 MHz
Features
4.0 dB Typical Noise Figure 13.5 ...
Description
AM-176 / AMC-176
Cascadable Thin Film Amplifier, 13 dB Gain, 5 - 1000 MHz
Features
4.0 dB Typical Noise Figure 13.5 dBm Typical Midband 1 dB Compression 1.25:1 Typical VSWR
Description
M/A-COM’s AM-176 is a feedback amplifier with high intercept and compression points. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-176 is ideally suited for use where a high intercept, high reliability amplifier is required.
TO-8-1
Rev. V4
Ordering Information
Part Number AM-176 PIN
AMC-176 SMA
Package TO-8-1
Connectorized
Absolute Maximum Ratings 1
Parameter Max. Input Power
Vbias Operating Temperature Storage Temperature
Absolute Maximum +10 dBm +15.75 V
-55°C to +85°C -65°C to +125°C
1. Operation of this device above any one of these parameters may cause permanent damage.
Outline Drawing: SMA Connectorized...
Similar Datasheet
- AM-1024600-070IP LCD - Amson
- AM-1024600B3TMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-00H LCD - AMPIRE
- AM-1024600BTMQW-T00H LCD - AMPIRE
- AM-1024600KTMQW-01H LCD - AMPIRE
- AM-1024600L2TMQW-00H LCD - AMP DISPLAY
- AM-1024600L3TMQW-T05H LCD - AMPIRE
- AM-1024768ETMCW-00 LCD - AMPIRE
- AM-1024768FTMQW-00H-F LCD - AMP DISPLAY
- AM-1024768G1TMQW-00H LCD - AMPIRE