TVS Diodes
Axial Leaded – 5 kW > 5KP-HRA series
5KP-HRA Series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
PPPM
5
PD 8.0
IFSM 400
VF 3.5/5.0
TJ, TSTG -55 to 175
kW
W
A
V
°C
Typical Thermal Resistance Junction
to Lead
RƟJL
8.0 °C/W
Typical Thermal Resistance Junction
to Ambient
RƟJA
40 °C/W
Notes:
1. Non-repetitive current pulse per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Description
The 5KP-HRA High Reliability Series is designed specifically
to protect sensitive electronic equipment from voltage
transients induced by lightning and other transient voltage
events.
Features
• 5 kW peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to VBR min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
•Typical
when
VIRBRlemssint>ha1n2V2μA
• High temperature
to reflow soldering
guaranteed: 260°C/10sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Vx(αBR(1T@:+TαeTmJT=pxVeB(rTRa@Jtu-2r25e5°C))
Coefficient, typical value
is 0.1%)
• UL Recognized compound
meeting flammability
rating V-0
• Lead-free matte tin plated
package
• Halogen free and RoHS
compliant
• Pb-free E3 indicates that
2nd level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Applications
TVS Components are ideal for the protection of I/O
tinetleecrfoamce,sc,oVmCCpbuutesr,anindduosthtreiar lvaunlndecroabnlseucmirecrueitlsecutsreodniicn
applications.
Cathode
Bi-directional
Uni-directional
Anode
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/08/18