Document
NXP Semiconductors Data Sheet: Technical Data
KV11P64M75 Rev. 6, 10/2020
Kinetis V Series KV10 and KV11, 128/64 KB Flash
75 MHz Cortex-M0+ Based Microcontroller
The Kinetis V Series KV11x MCU family is built on Arm® Cortex®-M0+ core and enabled by innovative 90nm thin film storage (TFS) flash process technology. The KV11x is an extension of the existing KV10x family providing increased memory, higher pin count, additional FTMs and a FlexCAN serial interface.
• Dual 16-bit ADCs sampling at up to 1.2 MS/s in 12-bit mode
• Highly accurate and flexible motor control timers • Ideal for industrial motor control applications, inverters, and
low-end power conversion applications
MKV11Z128VXX7 MKV11Z64VXX7 MKV10Z64VXX7 MKV10Z128VXX7
32 QFN
64 LQFP
5 x 5 x 1.23 mm Pitch 10 x 10 x 1.4 mm Pitch
0.5 mm
0.5 mm
32 LQFP 7 x 7 x 1.4 mm Pitch
0.8 mm
48 LQFP 7 x 7 x 1.4 mm Pitch
0.5 mm
Performance • Up to 75 MHz Arm Cortex-M0+ based core
Memories and memory interfaces • Up to 128 KB of program flash memory • Up to 16 KB of RAM
System peripherals • Nine low-power modes to provide power optimization based on application requirements • 8-channel DMA controller • SWD interface and Micro Trace buffer • Bit Manipulation Engine (BME) • External watchdog timer • Advanced independent clocked watchdog • Memory Mapped Divide and Square Root (MMDVSQ) module
Clocks • 32-40 kHz or 4-32 MHz external crystal oscillator • Multipurpose clock generator (MCG) with frequencylocked loop referencing either internal or external reference clock
Security and integrity modules • 80-bit unique identification (ID) number per chip • Hardware CRC module
Communication interfaces • One 16-bit SPI module • One I2C module • Two UART modules • One FlexCAN module1
Timers • Programmable delay block • Two 6-channel FlexTimers (FTM) for motor control/ general purpose applications • Four 2-channel FlexTimers (FTM) with quadrature decoder functionality • 16-bit low-power timer (LPTMR)
Operating Characteristics • Voltage range: 1.71 to 3.6 V • Flash write voltage range: 1.71 to 3.6 V • Temperature range (ambient): –40 to 105°C
Analog modules • Two 16-bit SAR ADCs • 12-bit DAC • Two analog comparators (ACMP) containing a 6-bit DAC and programmable reference input
Human-machine interface • General-purpose I/O
1. Available only on KV11 parts
NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.
Part Number 1
MKV11Z128VLH7 MKV11Z128VLF7 MKV11Z128VLC7 2 MKV11Z128VFM7 MKV11Z64VLH7 MKV11Z64VLF7 MKV11Z64VLC7 2 MKV11Z64VFM7 MKV10Z64VLH7 MKV10Z64VLF7 MKV10Z64VLC7 2 MKV10Z64VFM7 MKV10Z128VLH7 MKV10Z128VLF7 MKV10Z128VLC7 2 MKV10Z128VFM7
Ordering Information
Memory
Flash (KB)
SRAM (KB)
128
16
128
16
128
16
128
16
64
16
64
16
64
16
64
16
64
16
64
16
64
16
128
16
128
16
128
16
128
16
128
16
FlexCAN
Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No
Maximum number of I\O's
46 35 26 26 46 35 26 26 46 35 26 26 46 35 26 26
1. To confirm current availability of orderable part numbers, go to http://www.nxp.com and perform a part number search. 2. The 32-pin LQFP package supporting this part number is not yet available, however it is included in a Package Your
Way program for Kinetis MCUs. Please visit http://www.nxp.com/KPYW for more details.
Related Resources
Type Product Selector Product Brief
Reference Manual Data Sheet
Chip Errata
Package drawing
Description
Resource
The Product Selector is a web-based tool to assist in selecting the MCU Product Selector product for your application.
The Product Brief contains concise overview/summary information to enable quick evaluation of a device for design suitability.
KV10PB 1
The Reference Manual contains a comprehensive description of the structure and function (operation) of a device.
KV10P48M75RM 1
The Data Sheet includes electrical characteristics and signal connections.
This document
The chip mask set Errata provides additional or corrective information for a particular device mask set.
• KV10Z_1N81H1 • KINETIS_V_0N63P1
Package dimensions are provided in package drawings.
• QFN 32-pin: 98ASA00473D1
• LQFP 32-pin: 98ASH70029A1
• LQFP 48-pin: 98ASH00962A1
• LQFP 64-pin: 98ASS23234W1
1. To find the associated resource, go to http://www.nxp.com and perform a search using this term.
2 NXP Semiconductors
Kinetis V Series KV10 and KV11, 128/64 KB Flash, Rev. 6, 10/2020
LEGEND
Not available on all parts. See ordering information table.
Figure 1. KV11 block diagram
Kinetis V Series KV10 and KV11, 128/64 KB Flash, Rev. 6, 10/2020
3 NXP Semiconductors
Table of Contents
1 Ratings.................................................................................... 5 1.1 Thermal handling ratings................................................. 5 1.2 Moisture handling ratings................................