MKV10Z64VFM7

NXP Semiconductors Data Sheet: Technical Data KV11P64M75 Rev. 6, 10/2020 Kinetis V Series KV10 and KV11, 128/64 KB Flash 75 MHz Cortex-M0+ Based Microcontroller The Kinetis V Series KV11x MCU family is built on Arm® Cortex®-M0+ core and enabled by innovative 90nm thin film storage (TFS) flash process technology. The KV11x is an extension of the existing KV10x family providing increased memory, higher pin count, additional FTMs and a FlexCAN serial interface. Dual 16-bit ADCs sampling at up to 1.2 MS/s in 12-bit mode Highly accurate and flexible motor control timers Ideal for industrial motor control applications, inverters, and low-end power conversion applications MKV11Z128VXX7 MKV11Z64VXX7 MKV10Z64VXX7 MKV10Z128VXX7 32 QFN 64 LQFP 5 x 5 x 1.23 mm Pitch 10 x 10 x 1.4 mm Pitch 0.5 mm 0.5 mm 32 LQFP 7 x 7 x 1.4 mm Pitch 0.8 mm 48 LQFP 7 x 7 x 1.4 mm Pitch 0.5 mm Performance Up to 75 MHz Arm Cortex-M0+ based core Memories and memory interfaces Up to 128 KB of program flash memory Up to 16 KB of RAM System peripherals Nine low-power modes to provide power optimization based on application requirements 8-channel DMA controller SWD interface and Micro Trace buffer Bit Manipulation Engine (BME) External watchdog timer Advanced independent clocked watchdog Memory Mapped Divide and Square Root (MMDVSQ) module Clocks 32-40 kHz or 4-32 MHz external crystal oscillator Multipurpose clock generator (MCG) with frequencylocked loop referencing either...