I2C/SPI UART
XR20M1170
I2C/SPI UART with 64-Byte FIFO
February 2, 2022
Rev. 1.1.3
GENERAL DESCRIPTION
The XR20M11701 is a high per...
Description
XR20M1170
I2C/SPI UART with 64-Byte FIFO
February 2, 2022
Rev. 1.1.3
GENERAL DESCRIPTION
The XR20M11701 is a high performance universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I2C/SPI slave interface. The XR20M1170 operates from 1.62 to 3.63 volts. The enhanced features in the XR20M1170 include a programmable fractional baud rate generator, an 8X and 4X sampling rate that allows for a maximum baud rate of 16Mbps at 3.3V. The standard features include 16 selectable TX and RX FIFO trigger levels, automatic hardware (RTS/ CTS) and software (Xon/Xoff) flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. The XR20M1170 is available in the 24-pin QFN, 16-pin QFN, 24-pin TSSOP and 16pin TSSOP packages.
NOTE: 1 Covered by U.S. Patent #5,649,122
APPLICATIONS
Portable appliances
Battery-operated devices
Cellular data devices
Factory automation and process controls
FEATURES
1.62 to 3.6 Volt operation
Selectable I2C/SPI interface
SPI clock frequency up to
18MHz at 3.3V 16MHz at 2.5V 8MHz at 1.8V
Full-featured UART
Data rate of up to 16Mbps at 3.3V Data rate of up to 12.5Mbps at 2.5V Data rate of up to 8Mbps at 1.8V Fractional baud rate generator Transmit and receive FIFOs of 64 bytes 16 selectable TX and RX FIFO trigger levels Automatic hardware (RTS/CTS) flow control ...
Similar Datasheet