Noise Amplifier. PE15A63003 Datasheet

PE15A63003 Amplifier. Datasheet pdf. Equivalent

Part PE15A63003
Description Low Noise Amplifier
Feature 39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to 1.5 GHz, Low Noise Amplifier, 29 dB Gain, SMA TECHNIC.
Manufacture Pasternack
Datasheet
Download PE15A63003 Datasheet

39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to 1.5 GHz, Low N PE15A63003 Datasheet
Recommendation Recommendation Datasheet PE15A63003 Datasheet





PE15A63003
39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to
1.5 GHz, Low Noise Amplifier, 29 dB Gain, SMA
TECHNICAL DATA SHEET
PE15A63003
The PE15A63003 is a Input Protected Low Noise RF coaxial amplifier operating in the 30 MHz to 1.5 GHz frequency range.
The amplifier offers 1 Watt input protection, 1.6 dB typical noise figure, 23 dBm typical P1dB and high 29 dB small signal gain
with gain flatness of ±0.5 dB typical. The low noise amplifier requires typically a 12V DC power supply. The connectorized
SMA module is unconditionally stable and includes built-in voltage regulation. This low noise amplifier requires only a single
positive supply, is unconditionally stable and operates over the temperature range of -55°C and 125°C.
Features
30 MHz to 1500 MHz Frequency Range
1 Watt input protection
P1dB: 23 dBm
High Small Signal Gain: 29 dB typical
Gain Flatness: ±0.5 dB
Gain Variance: ±1 dB
Noise Figure: 1.6 dB typ
50 Ohm Input and Output Matched
-55 to 125°C Operating Temperature
Unconditionally Stable
Single DC Positive Supply
Built-in Voltage Regulator
Applications
Laboratory Applications
R&D Labs
Radar Systems
• Test Instrumentation
Communication Systems
Low Noise Amplifier
General Purpose Amplification
Wideband Gain Block
IF Amplifier/RF Driver Amplifier
RF Wideband Front Ends
Fixed and Land Mobile
Electrical Specifications (TA = +25°C, DC Voltage = 12Vdc, DC Current = 160mA)
Description
Minimum Typical Maximum Units
Frequency Range
0.03
1.5 GHz
Small Signal Gain
27.5
Gain Flatness
29
±0.5
30.5
±0.75
dB
dB
Gain Variance at OTR*
Output at 1 dB Compression Point
+21.5
±1
+23
dB
dBm
Output 3rd Intercept Point
+36
Noise Figure
+39
1.6 2
dBm
dB
Input VSWR
Output VSWR
1.35:1
1.35:1
1.5:1
1.5:1
Reverse Isolation
45
Spurious
-70
dB
dBc
Input Power (CW)
Operating DC Voltage
10 12
+30 dBm
15 Volts
Operating DC Current
Operating Temperature Range
..
140 160 190 mA
-40
+85 °C
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to 1.5 GHz, Low Noise Amplifier, 29 dB Gain,
SMA PE15A63003
PE15A63003 REV 1.1
1



PE15A63003
39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to
1.5 GHz, Low Noise Amplifier, 29 dB Gain, SMA
TECHNICAL DATA SHEET
PE15A63003
Mechanical Specifications
Size
Length
Width
Height
.
Weight
Input Connector
Output Connector
Environmental Specifications
Temperature
Operating Range
Storage Range
.
1.2 in [30.48 mm]
0.85 in [21.59 mm]
0.375 in [9.53 mm]
0.046 lbs [20.87 g]
SMA Female
SMA Female
-40 to +85 deg C
-55 to +125 deg C
Compliance Certifications (see product page for current document)
Plotted and Other Data
Notes:
Values at +25 °C, sea level
ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 39 dBm IP3, 1.6 dB NF, 23 dBm P1dB, 30 MHz to 1.5 GHz, Low Noise Amplifier, 29 dB Gain,
SMA PE15A63003
PE15A63003 REV 1.1
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)