Dual Channel Charge Pump LED Driver
Preliminary Datasheet LP3368
Dual Channel Charge Pump LED Driver
General Description
The LP3368 charge pump LED driver...
Description
Preliminary Datasheet LP3368
Dual Channel Charge Pump LED Driver
General Description
The LP3368 charge pump LED driver is designed for powering dual channel high brightness LEDs for camera flash applications. The LP3368 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. The LP3368 provides two current levels for TORCH and FLASH modes in each channel. In TORCH mode, The LED current sense reference voltage is 50mV. The LED current can be determined by current sense resistor. In FLASH mode, the current sense reference voltage can be adjusted by external resistor. The maximum LED current can be set up to 1A. The LP3368 is available in a 16-lead 4mm*4mm TQFN-16 package and is rated over the -40°C to 85°C temperature range.
Order Information
LP3368 □ □ □
F: Pb-Free
Package Type QV: TQFN-16
Typical Application Circuit
LP3368
VIN
CIN
VIN1 VIN2
C11
OUT1
LED1 Cout1
C1
C12 C21
C2
FB1 Rsense1
C22
ON OFF
...
Similar Datasheet