Stepper Motors. 42D112D Datasheet

42D112D Motors. Datasheet pdf. Equivalent


Part 42D112D
Description Standard Stepper Motors
Feature FEATURES 42D Series - Standard Stepper Motors • NEMA 42 Frame Size • Best Selection for High Speed .
Manufacture Anaheim
Datasheet
Download 42D112D Datasheet


FEATURES 42D Series - Standard Stepper Motors • NEMA 42 Fra 42D112D Datasheet
Recommendation Recommendation Datasheet 42D112D Datasheet




42D112D
42D Series - Standard Stepper Motors
• NEMA 42 Frame Size
• Best Selection for High Speed Applications
• 1.8° Step Angle
• Torque - Up to 630 oz-in
• Customization Options:
- Winding Current
- Shaft Options
- Cables and Connectors
- Lead Configuration
- Conduit Box
The 42D Series Stepper Motors is a standard (round-bodied) style stepper motor. They
have lower rotor inertia than square high torque motors which allow them to accelerate
faster and offer higher torque at speeds greater than 25 revolutions per second. These
motors are an excellent choice to replace many of the round stepper motors that were popular
for many years. The standard 42D frame motor is configured with a conduit box. Anaheim
Automation can also customize the winding to perfectly match your voltage, current, and maximum
operating speed. Special shaft modifications, lead configuration, conduit box, cables
and connectors are also available upon request. Often referred to as “legacy motors,”
the 42D series is a good cross to the Superior Electric Slosyn series M111 and M112.
Model #
NEMA
Size
Bipolar
Holding
Torque
(oz-in)
Series
Current
(A)
Unipolar
Current
(A)
42D112D
42D112S
42D119D
42D119S
42D212D
42D212S
42D219D
42D219S
42D225D
42D225S
42
42
42
42
42
42
42
42
42
42
875
875
875
875
1575
1575
1575
1575
1575
1575
4.3
4.3
6.7
6.7
4.3
4.3
6.5
6.5
8.9
8.9
6.1
6.1
9.5
9.5
6.1
6.1
9.2
9.2
12.7
12.7
Unipolar
Inductance
(mH)
Rotor
Inertia
(oz-in-sec2)
Shaft
Diameter
(in)
3
0.0546
.625
3
0.0546
.625
0.88
0.0546
.625
0.88
0.0546
.625
5.94
0.1105
.625
5.94
0.1105
.625
2.0
0.1105
.625
2.0
0.1105
.625
1.0
0.1105
.625
1.0
0.1105
.625
Weight
(lbs)
“L”
Length
(in)
9 4.74
9 4.74
9 4.74
9 4.74
15.7 6.99
15.7 6.99
15.7 6.99
15.7 6.99
15.7 6.99
15.7 6.99
Notes: The 7th character “S” denotes a single shaft, use “D” for double shaft. Custom leadwires, cables, connectors, and
windings are available upon request. 8 lead wire configurations are also available.
L011557
4985 E. Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com



42D112D
Connection Lead Wire Connection Contact #
4 - Lead Bipolar Series
MBC, MLP or MLA Series
Phase 1 (A)
Phase 3 (/A)
Phase 2 (B)
Phase 4 (/B)
Connect Wires with Wire Nut
Connect Wires with Wire Nut
9
2
1
7
5&6
4&8
6 - Lead Unipolar
BLD, TM Series
Phase 1
Phase 3
Phase 2
Phase 4
Common Phase 1 & 3
Common Phase 2 & 4
9
2
1
7
5&6
4&8
4 - Lead Bipolar Parallel
MBC, MLP or MLA Series
Phase 1 (A)
Phase 3 (/A)
Phase 2 (B)
Phase 4 (/B)
5&9
2&6
1&4
7&8
Step Angle Accuracy:
Resistance Accuracy:
Inductance Accuracy:
Temperature Rise:
Ambient Temperature:
Insulation Type:
Insulation Resistance:
±5% of one step
±10%
± 20%
100°C
-20°C - +50°C
Class B
1000M Ohms at 500VDC
4985 E. Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)