USB2.0 to QuadSPI/I2C Bridge
FT4222H USB2.0 TO QUADSPI/I2C BRIDGE IC Datasheet Version 1.5
Document No.: FT_001011 Clearance No.: FTDI#405
Future Tec...
Description
FT4222H USB2.0 TO QUADSPI/I2C BRIDGE IC Datasheet Version 1.5
Document No.: FT_001011 Clearance No.: FTDI#405
Future Technology Devices International Ltd.
FT4222H
(USB2.0 to QuadSPI/I2C Bridge IC)
FT4222H is a USB2.0 to Quad-SPI/I2C interface Device Controller with the following advanced features:
Single chip USB2.0 Hi-speed to SPI/I2C bridge with a variety of configurations
Entire USB protocol handled on the chip.
On-chip OTP memory for USB Vendor ID (VID),
Product ID (PID), device serial number,
product description string and various other
vender specific data.
Configurable industry standard SPI
Master/Slave interface controller
Support configurable data width with single, dual, quad data width transfer mode in SPI master
SCK can support up to 30MHz in SPI master
Up to 53.8Mbps data transfer rate in SPI master with quad mode transfer
Support single bit data transfer with full-duplex transfer in SPI Slave
Support up to 4 channels slave selection control pins in SPI master application
Configurable I2C Master/Slave interface controller conforming to I2C v2.1 and v3.0 specification.
Support 4 speed modes as defined in the I2C- bus Specification, standard mode (SM) up to 100Kbit/s, fast mode (FM) up to 400Kbit/s, Fast mode plus (FM+) up to 1Mbit/s, and High Speed mode (HS) up to 3.4 Mbit/s
Configurable GPIOs can be easily controlled by software applications via USB bus
USB Battery Charger Detection.
Device su...
Similar Datasheet