OCP8128 Controller Datasheet

OCP8128 Datasheet, PDF, Equivalent


Part Number

OCP8128

Description

High Current and High Efficiency Backlight WLED Controller

Manufacture

Orient Chip

Total Page 3 Pages
Datasheet
Download OCP8128 Datasheet


OCP8128
OCP8128
High Current and High Efficiency Backlight WLED Controller
for Large LCD Panels
General Description
The OCP8128 is the LED driver controller IC which
loads the constant current driver of LED driver for use in
backlighting LCD display from 26to 56+ and other
LED lighting applications with multiple strings of LEDs.
OCP8128 is a high current and high efficiency backlight
LED driver controller which provides 6-channel LED
current sense inputs in an ORconfiguration for
improved backlight reliability and efficiency. This allows
the backlight to remain functioning in the event that any
string is damaged during normal operation.
The operation frequency is user-defined with
spread spectrum operation feature that minimizes
system EMI during operation.
OCP8128 provides an internal PWM dimming
function, where the PWM dimming signal is phase-shifted
by 60 degree per channel when all 6-channels are
connected. The proprietary feature significantly enhances
the system performance during PWM dimming. The
phase shift number for PWM dimming operation is
selected by 2, 3, 4, 5 and 6 phase. The proprietary
feature reduces output current ripple and improves the
quality of the LCD display.
The OCP8128 also supports external PWM dimming
and analog dimming control, providing the most flexible
solution for LED display applications. The internal PWM
frequency can be synchronized with an external pulse
signal.
The OCP8128 provides the LED over-current
protection (OCP), LED short-circuit protection (SCP),
Power MOSFET over-current protection (OCP), LED
open/short circuit, under-voltage lock-out (UVLO), a
fault STATUS output, external synchronization function.
The LPWM frequency can be synchronized to an
external pulse signal.
OCP8128 integrated a balance current controller
for each LED string. It results in high efficiency. The
shutdown current of OCP8128 is approximately max.
2.0uA.
The OCP8128 is available in SOP-28L package,
and it is RoHS compliant and 100% lead Pb free.
Operating temperature range of the OCP8128 is from
-40°C to 85°C.
Features
6-string in parallel
Number of LEDs in series limited by external
MOSFETs rating
Integrated high efficiency switch mode current
balance controller
Spread Spectrum Feature on Operating
Frequency
Support Analog and External PWM Dimming
Integrated user selectable 2, 3, 4, 5 and 6
phase-shift PWM dimming
PWM dimming synchronized with external signal
LED Short Circuit Protection
User Defined Short Circuit Protection threshold
Over-current Protection
Wide Supply Voltage Range: 7.0V ~ 16V
Under-voltage lock-out
LED Fault STATUS output
Integrated high frequency oscillator
Low Standby current <2uA
Thermal shutdown
TA= -40 ~ 85
Available in SOP-28L Package
Applications
LCD White or RGB Backlighting
LCD TVs
Automotive and Infotainment Displays
Battery Powered LED Lamps
Other DC/DC LED Drivers
General LED Lighting Applications
General Purpose Constant Current Source
Signage and Decorative LED Lighting
Page1 - 3
Rev.1.3 Feb .27, 2018
源于灿瑞 磁传天下

OCP8128
Pin Configuration
SOP-28L (Top View)
OCP8128
Pin
Name
SEL
EN
VREG
ADIM
STATUS
GATE1~3
VCC
PGND
GATE4~6
AGND
Pin No.
SOP28L
1
2
3
4
5
6~8
9
10
11~13
14
IFB1~6 15~20
PWM
VSCP
RSET
TIMER
SYNC
FDIM
DC
PRC
21
22
23
24
25
26
27
28
Figure 1, Pin Assignments of OCP8128
I/O Pin Function
I Internal PWM Synchronization ratio selection
I Enable Pin
I/O Internal Regulator Output
I Analog Dimming Input
O LED Operation Status Output (open drain)
O
External MOSFET(1~3) Gate Drive for String 1~3 LED Balance
Current Control
P Power Supply Input
P Power Ground
O
External MOSFET(4~6) Gate Drive for String 4~6 LED Balance
Current Control
P Analog Ground
Set String 1~6 LED Current. Connect a sense resistor from this pin to
I AGND. The LED Current is programmed by ILED=VIFB/(Sense
Resistance).
I External PWM Dimming Signal Input
I Setting the Short Circuit Protection Threshold
I/O Set the Operation Frequency Resistance Pin
I/O Protection Delay Timer
I PWM Synchronization Signal Input Pin
I/O Setting Resistor to set the internal dimming frequency
I DC Input Voltage for Internal PWM Duty Cycle Control
I/O Low Pass Filter for internal PWM Synchronization
Page2 - 3
Rev.1.3 Feb .27, 2018
源于灿瑞 磁传天下


Features WWW.ORIENT-CHIP.COM OCP8128 High Curre nt and High Efficiency Backlight WLED C ontroller for Large LCD Panels ◼ Gen eral Description The OCP8128 is the LED driver controller IC which loads the c onstant current driver of LED driver fo r use in backlighting LCD display from 26” to 56”+ and other LED lighting applications with multiple strings of L EDs. OCP8128 is a high current and high efficiency backlight LED driver contro ller which provides 6-channel LED curre nt sense inputs in an “OR” configur ation for improved backlight reliabilit y and efficiency. This allows the backl ight to remain functioning in the event that any string is damaged during norm al operation. The operation frequency i s user-defined with spread spectrum ope ration feature that minimizes system EM I during operation. OCP8128 provides an internal PWM dimming function, where t he PWM dimming signal is phase-shifted by 60 degree per channel when all 6-cha nnels are connected. The proprietary feature significantly enha.
Keywords OCP8128, datasheet, pdf, Orient Chip, High, Current, and, High, Efficiency, Backlight, WLED, Controller, CP8128, P8128, 8128, OCP812, OCP81, OCP8, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)