AT91SAM7A2

Features ARM7TDMI® ARM® Thumb® Processor Core – High Performance 32-bit RISC – High-density 16-bit Instruction set (Thumb) – Leader in MIPS/Watt – Embedded ICE (In Circuit Emulation) 16 Kbytes Internal SRAM Fully Programmable External Bus Interface (EBI) – Maximum External Address Space of 6 Mbytes, Up to Four Chip Select Lines 8-level Priority, Vectored Interrupt Controller – Three External Interrupts Including One Fast Interrupt Line Ten Channel Peripheral Data Controller (PDC) 57 Programmable I/O Lines Four 16-bit General Purpose Timers (GPT) – Three Configurable Modes: Counter, PWM, Capture – Four External Clock Inputs, Three Multi-purpose I/O Pins per Timer Four 16-bit Simple Timers (ST) Four Channel 16-bit Pulse Width Modulation (PWM) Four CAN Controllers 2.0A and 2.0B Full CAN – One with 32 Buffers, Three with 16 Buffers Two USARTs – Support for J1587 and LIN Protocols One Master/Slave SPI Interface – 8 to 16-bit Programmable Data Length – Four External Serial Peripheral Chip Selects Two 8-channel 10-bit Analog to Digital Converters (ADC) Two 16-bit Capture Modules (CAPT) Programmable Watch Timer (WT) Programmable Watchdog (WD) Power Management Controller (PMC) – 32 kHz Oscillator, Main Oscillator and PLL IEEE 1149.1 JTAG Boundary-scan on all Digital Pins Fully Static Operation: 0 Hz to 30 MHz at VDDCORE=3.3V, 85°C 3.0V to 5.5V Operating Voltage Range 3.0V to 3.6V Core, Memory and Analog Voltage Range -40° to +85°C Operating Temperature Range Available in a 176-lead ...