1003MHz 34dB. QPA3320 Datasheet

QPA3320 34dB. Datasheet pdf. Equivalent


Qorvo QPA3320
QPA3320
® CATV Push Pull Hybrid 1003MHz 34dB
Product Description
QPA3320
The QPA3320 is a Hybrid Push Pull amplifier
module. The part employs GaAs/GaN die and is
operated from 40 MHz to 1003 MHz. It provides
excellent linearity and superior return loss
performance with low noise and optimal reliability.
Functional Block Diagram
V+
INPUT
OUTPUT
Package: SOT-115J
Product Features
Excellent Linearity
Superior Return Loss Performance
Extremely Low Distortion
Optimal Reliability
Extremely Low Noise
Unconditionally Stable Under all Terminations
34.5 dB Min Gain at 1003 MHz
280 mA Max. at 24 VDC
Applications
401003 MHz CATV Amplifier Systems
Ordering Information
Part No.
QPA3320
Description
Box with 50 pcs
Data Sheet Rev. C, November 25, 2016 | Subject to change without notice
1 of 4
www.qorvo.com


QPA3320 Datasheet
Recommendation QPA3320 Datasheet
Part QPA3320
Description CATV Push Pull Hybrid 1003MHz 34dB
Feature QPA3320; QPA3320 ® CATV Push Pull Hybrid 1003MHz 34dB Product Description QPA3320 The QPA3320 is a Hybrid .
Manufacture Qorvo
Datasheet
Download QPA3320 Datasheet




Qorvo QPA3320
®
QPA3320 Absolute Maximum Ratings
Parameter
Value / Range
RF Input Voltage (single tone)
70 dBmV
DC Supply over-voltage (5 minutes)
+30 V
Storage Temperature
−40 to 100 °C
Operating Mounting Base Temperature
30 to 85 °C
Operation of this device outside the parameter ranges given above may
cause permanent damage.
QPA3320
Electrical Specifications
Parameter
Operational Frequency Range
Current (IDD)
Gain
Gain
Gain Slope
Gain Flatness
Input Return Loss
Output Return Loss
Noise Figure
CTB
XMOD
CSO
Conditions (V+=24V, TMB=30°C, ZS=ZL=75)
fo = 50 MHz
fo = 1003 MHz
40 to 1003 MHz [1]
40 to 1003 MHz
fo= 40 to 160 MHz
fo= 160 to 870 MHz
fo= 870 to 1003 MHz
fo= 40 to 160 MHz
fo= 160 to 870 MHz
fo= 870 to 1003 MHz
fo= 50 to 1003 MHz
Vo=44 dBmV, flat, 110 analog channels [2]
Min Typ Max Units
40 – 1003 MHz
280 mA
34.0
34.5 36.5
dB
0.5 2.5
1.0
20 –
17 – dB
16 –
20 –
17 – dB
16 –
– 4.5 dB
-66 -64 dBc
-60 -58 dBc
-65 -63 dBc
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 110 analog channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +44dBmV flat output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by ANSI/SCTE 6. Composite Triple Beat
(CTB) The CTB parameter is defined by ANSI/SCTE 6. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband
(selective voltmeter method), referenced to 100% modulation of the carrier being tested. Carrier to Intermodulation Noise (CIN) - The CIN
parameter is defined by ANSI/SCTE 17 (Test procedure for carrier to noise).
Data Sheet Rev. C, November 25, 2016 | Subject to change without notice
2 of 4
www.qorvo.com



Qorvo QPA3320
®
Package Drawing (Dimensions in millimeters)
QPA3320
Data Sheet Rev. C, November 25, 2016 | Subject to change without notice
3 of 4
www.qorvo.com







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)