|
|
Torch light. ELCH07-NB5565J6J7283910-P1S Datasheet |
|
|
ELCH07-NB5565J6J7283910-P1S
Received
■ MASS PRODUCTION
□ PRELIMINARY
□ CUSTOMER DESIGN
DEVICE NO. : DHE-0002758
PAGE : 12
REV.
1
2
Revised record
DESCRIPTION
New spec
Change Product Labeling
RELEASE DATE
Mar.10.2015
Sep.25.2015
1 Copyright © 2010, Everlight All Rights Reserved. Release Date :Sep.25.2015 Issue No: DHE-0002758
www.everlight.com
|
|
DATASHEET
ELCH07-NB5565J6J7283910-P1S
ELCH07-NB5565J6J7283910-P1S
Features
• Feature of the device：small package with high efficiency
• Typical luminous flux@ 1A：230 lm
• Optical efficiency@1A：67.64 lm/W
• ESD protection (according to JEDEC 3b) (HBM air or contact discharge)up to 8KV
• Binning Parameters：Brightness, Forward Voltage and Chromaticity
• Grouping parameter: total luminous flux, color coordinates.
• RoHS compliant & Pb free.
Applications
• Mobile Phone Camera Flash(Camera flash light /strobe light for mobile devices )
• Torch light for DV(Digital Video) application
• Indoor lighting applications
• Signal and symbol luminaries for orientation maker lights (e.g. steps, exit ways, etc.)
• TFT backlighting
• Exterior and interior illumination applications
• Decorative and Entertainment Lighting
• Exterior and interior automotive illumination
2 Copyright © 2010, Everlight All Rights Reserved. Release Date : Sep.25.2015 Issue No: DHE-0002758
www.everlight.com
|
DATASHEET
ELCH07-NB5565J6J7283910-P1S
Device Selection Guide
Chip Materials
InGaN
Absolute Maximum Ratings
Emitted Color
Cool White
Parameter
DC Forward Current (Torch Mode)
Peak Pulse Current
(400 ms on / 3600 ms off / 30000 cycle )
ESD Resistance (JEDEC 3b)
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
Substrate Temperature
Viewing Angle(2)
Power Dissipation (Pulse Mode)
Symbol
IF
IPulse
VB
VR
TJ
TOpr
TStg
TSol
n/a
Ts
2θ1/2
Pd
Rating
350
1500
8000
Note 1
150
-40 ~ +85
-40 ~ +100
260
2
70(IF=1000mA)
120
5.925
Unit
mA
mA
V
V
℃
℃
℃
℃
Cycles
℃
Deg
W
Notes:
1.
2.
3.
4.
5.
6.
7.
The CHIN series LEDs are not designed for reverse bias used.
View angle measurement tolerance±5°
Avoid operating CHIN series LEDs at maximum operating temperature exceed 1 hour.
All specification are assured by reliability test for 1000hr, IV degradation less than 30%.
All reliability items are tested under good thermal management with 1.0x 1.0 cm2 MCPCB.
Peak pulse current shall be applied under conditions as max duration time 400ms and max duty cycle 10%
Operate LED component at maximum rating conditions continuously will cause possible permanent damage and
de-rating parameters. Exercise multiple maximum rating parameters simultaneously should not be allowed. When
maximum rating parameters are applied over a long period will result potential reliability issue.
3 Copyright © 2010, Everlight All Rights Reserved. Release Date : Sep.25.2015 Issue No: DHE-0002758
www.everlight.com
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |