OPA363 AMPLIFIER Datasheet

OPA363 Datasheet, PDF, Equivalent


Part Number

OPA363

Description

RAIL-TO-RAIL I/O OPERATIONAL AMPLIFIER

Manufacture

Burr-Brown

Total Page 18 Pages
Datasheet
Download OPA363 Datasheet


OPA363
OPA4364 ®
OPA2364
OPA2363
OPA4364
OPA363
OPA363
OPA2363
OPA364
OPA2364
OPA4364
SBOS259B – SEPTEMBER 2002 – REVISED FEBRUARY 2003
1.8V, 7MHz, 90dB CMRR,
SINGLE-SUPPLY, RAIL-TO-RAIL I/O
OPERATIONAL AMPLIFIER
FEATURES
q 1.8V OPERATION
q MicroSIZE PACKAGES
q BANDWIDTH: 7MHz
q CMRR: 90dB (typical)
q SLEW RATE: 5V/µs
q LOW OFFSET: 500µV (max)
q QUIESCENT CURRENT: 750µA/Channel (max)
q SHUTDOWN MODE: < 1µA/Channel
APPLICATIONS
q SIGNAL CONDITIONING
q DATA ACQUISITION
q PROCESS CONTROL
q ACTIVE FILTERS
q TEST EQUIPMENT
SOT23-5
SOT23-6
MSOP-8
MSOP-10
SO-8
TSSOP-14
SO-14
OPA363
x
x
OPA364 OPA2363 OPA2364 OPA4364
x
x
x
xx
x
x
DESCRIPTION
The OPA363 and OPA364 families are high-performance
CMOS operational amplifiers optimized for very low voltage,
single-supply operation. These miniature, low-cost amplifiers
are designed to operate on single supplies from 1.8V (±0.9V)
to 5.5V (±2.75V). Applications include sensor amplification
and signal conditioning in battery-powered systems.
The OPA363 and OPA364 families offer excellent CMRR
without the crossover associated with traditional complimen-
tary input stages. This results in excellent performance for
driving Analog-to-Digital (A/D) converters without degrada-
tion of differential linearity and THD. The input common-
mode range includes both the negative and positive supplies.
The output voltage swing is within 10mV of the rails.
The OPA363 family includes a shutdown mode. Under logic
control, the amplifiers can be switched from normal operation
to a standby current that is less than 1µA.
The single version is available in the MicroSIZE SOT23-5
(SOT23-6 for shutdown) and SO-8. The dual version is
available in MSOP-8, MSOP-10, and SO-8 packages. Quad
packages are available in TSSOP-14 and SO-14 packages.
All versions are specified for operation from –40°C to +125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 2002-2003, Texas Instruments Incorporated

OPA363
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage ................................................................................. +5.5V
Signal Input Terminals, Voltage(2) ........................... –0.5V to (V+) + 0.5V
Current(2) .................................................. ±10mA
Enable Input ............................................................... (V–) – 0.5V to 5.5V
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –40°C to +150°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those specified is
not implied. (2) Input terminals are diode-clamped to the power-supply rails.
Input signals that can swing more than 0.5V beyond the supply rails should
be current limited to 10mA or less. (3) Short-circuit to ground one amplifier
per package.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper han-
dling and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
PACKAGE/ORDERING INFORMATION
PRODUCT
OPA363I
"
PACKAGE-LEAD
SOT23-6
"
PACKAGE
DESIGNATOR(1)
DBV
"
SPECIFIED
TEMPERATURE
RANGE
–40°C to +125°C
"
PACKAGE
MARKING
A40
"
ORDERING
NUMBER
OPA363IDBVT
OPA363IDBVR
OPA363I
"
SO-8
"
D
–40°C to +125°C
OPA363
OPA363ID
" " " OPA363IDR
OPA2363I
"
MSOP-10
"
DGS
"
–40°C to +125°C
"
BHK
"
OPA2363IDGST
OPA2363IDGSR
OPA364I
"
SOT23-5
"
DBV
"
–40°C to +125°C
"
A41
"
OPA364IDBVT
OPA364IDBVR
OPA364I
"
SO-8
"
D
–40°C to +125°C
OPA364
OPA364ID
" " " OPA364IDR
OPA2364I
"
MSOP-8
"
DGK
"
–40°C to +125°C
BHL
OPA2364IDGKT
" " OPA2364IDGKR
OPA2364I
"
SO-8
"
D
–40°C to +125°C
OPA2364
OPA2364ID
" " " OPA2364IDR
OPA363AI
"
SOT23-6
"
DBV
"
–40°C to +125°C
A40
OPA363AIDBVT
" " OPA363AIDBVR
OPA363AI
"
SO-8
"
D
–40°C to +125°C
OPA363A
OPA363AID
" " " OPA363AIDR
OPA2363AI
"
MSOP-10
"
DGS
"
–40°C to +125°C
"
BHK
"
OPA2363AIDGST
OPA2363AIDGSR
OPA364AI
"
SOT23-5
"
DBV
"
–40°C to +125°C
A41
OPA364AIDBVT
" " OPA364AIDBVR
OPA364AI
"
SO-8
"
D
–40°C to +125°C
OPA364A
OPA364AID
" " " OPA364AIDR
OPA2364AI
"
SO-8
"
D
–40°C to +125°C
OPA2634A
OPA2364AID
" " " OPA2364AIDR
OPA2364AI
"
MSOP-8
"
DGK
"
–40°C to +125°C
BHL
OPA2364AIDGKT
" " OPA2364AIDGKR
OPA4364AI
"
SO-14
"
D
–40°C to +125°C
OPA4364A
OPA4364AID
" " " OPA4364AIDR
OPA4364AI
"
TSSOP-14
"
PW
–40°C to +125°C
OPA4364A
OPA4364AIPWT
" " " OPA4364AIPWR
NOTES: (1) For the most current specifications and package information, refer to our web site at www.ti.com.
TRANSPORT
MEDIA, QUANTITY
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Rails, 58
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
2 OPA363, 2363, 364, 2364, 4364
www.ti.com
SBOS259B


Features OPA4364 ® OPA2364 OPA2363 OPA4364 OP A363 OPA363 OPA2363 OPA364 OPA2364 OPA 4364 SBOS259B – SEPTEMBER 2002 – R EVISED FEBRUARY 2003 1.8V, 7MHz, 90dB CMRR, SINGLE-SUPPLY, RAIL-TO-RAIL I/O O PERATIONAL AMPLIFIER FEATURES q 1.8V O PERATION q MicroSIZE PACKAGES q BANDWID TH: 7MHz q CMRR: 90dB (typical) q SLEW RATE: 5V/µs q LOW OFFSET: 500µV (max) q QUIESCENT CURRENT: 750µA/Channel (m ax) q SHUTDOWN MODE: < 1µA/Channel APP LICATIONS q SIGNAL CONDITIONING q DATA ACQUISITION q PROCESS CONTROL q ACTIVE FILTERS q TEST EQUIPMENT SOT23-5 SOT23 -6 MSOP-8 MSOP-10 SO-8 TSSOP-14 SO-14 OPA363 x x OPA364 OPA2363 OPA2364 OPA4 364 x x x xx x x DESCRIPTION The OPA36 3 and OPA364 families are high-performa nce CMOS operational amplifiers optimiz ed for very low voltage, single-supply operation. These miniature, low-cost am plifiers are designed to operate on sin gle supplies from 1.8V (±0.9V) to 5.5V (±2.75V). Applications include sensor amplification and signal conditioning in battery-powered syste.
Keywords OPA363, datasheet, pdf, Burr-Brown, RAIL-TO-RAIL, I/O, OPERATIONAL, AMPLIFIER, PA363, A363, 363, OPA36, OPA3, OPA, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)