ESD Protection. ESD9FN5.0 Datasheet

ESD9FN5.0 Protection. Datasheet pdf. Equivalent


Formosa MS ESD9FN5.0
Chip Transient Voltage Suppressor ESD Protection
ESD9FN5.0
Formosa MS
List
List................................................................................................. 1
Package outline............................................................................... 2
Features..........................................................................................2
Mechanical data...............................................................................2
Maximum ratings .............................................................................2
Electrical characteristics...................................................................2
Typical characteristics......................................................................3
Rating and characteristic curves........................................................4
Pinning information.......................................................................... 5
Marking...........................................................................................5
Suggested solder pad layout............................................................. 5
Packing information......................................................................... 6
Reel packing....................................................................................7
Suggested thermal profiles for soldering processes.............................7
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 1
Document ID
DS-121850
Issued Date
2011/11/25
Revised Date
2015/12/11
Revision
E
Page.
7


ESD9FN5.0 Datasheet
Recommendation ESD9FN5.0 Datasheet
Part ESD9FN5.0
Description Chip Transient Voltage Suppressor ESD Protection
Feature ESD9FN5.0; Chip Transient Voltage Suppressor ESD Protection ESD9FN5.0 Formosa MS List List....................
Manufacture Formosa MS
Datasheet
Download ESD9FN5.0 Datasheet




Formosa MS ESD9FN5.0
Chip Transient Voltage Suppressor ESD Protection
ESD9FN5.0
200W Surface Mount TVS Uni-directional
For ESD Protection- 5.0V
Formosa MS
Features
Small body outline dimensions:
0.039” X 0.024” (1.0mm X 0.60mm).
Halogen free.
Provide transient protection:
IEC 61000-4-2 (ESD) meets level 4,15kV(Air),8kV(Contact)
IEC 61000-4-4 (EFT) 80A (5/50ns)
IEC 61000-4-5 (Surge) 13A (8/20us))
Low leakage current.
Suffix "-H" indicates Halogen-free parts, ex. ΕSD9FΝ5.0-H.
Mechanical data
Epoxy: UL94-V0 rated flame retardant
Case: Molded plastic,0402
Terminals: Golden Plated terminals,
solderable per MIL-STD-750,Method 2026
Marking Code: T
Weight: Approximated 0.001gram
Schematic & Pin Configuration
Package outline
0402
0.041(1.05)
0.037(0.95)
0.026(0.65)
0.022(0.55)
0.0138(0.35) Typ.
0.012(0.30)Typ.
0.022(0.55)
0.018(0.45)
0.0177(0.45) Typ.
Dimensions in inches and (millimeters)
Maximum ratings (at TA=25oC unless otherwise noted)
PARAMETER
CONDITIONS
Peak pulse power
tp = 8/20us
Peak pulse current
tp = 8/20us (IEC 61000-4-5)
ESD per IEC 61000-4-2
Air discharge
Contact discharge
Operating junction temperature range
Storage temperature range
Symbol
PPP
IPP
MIN.
ESD
TJ
TSTG
-55
-55
TYP.
MAX. UNIT
200 W
13 A
±20
KV
±15
+125 OC
+150 OC
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only.
Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to
stresses above the Recommended Operating Conditions may affect device reliability.
Electrical characteristics (at TA=25oC unless otherwise noted, VF = 1.2V Max. @IF = 10mA)
Part No.
V (RWM V)
Max.
IR(uA)
@VRWM
Max.
IT(mA)
VBR(V)
@IT
Min.
VC(V)
@I =PP 13A
Max.
CJ(pF)
@VR=0V,F=1MHz
Max.
ESD9FN5.0
5.0
2.0
1.0
6.0
15.5
120
Over voltage available upon request.
1. VBR is measured with a pulse test current IT at anambient temperature of 25OC.
2.Surge current waveform per Figure.
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 2
Document ID
DS-121850
Issued Date
2011/11/25
Revised Date
2015/12/11
Revision
E
Page.
7



Formosa MS ESD9FN5.0
Chip Transient Voltage Suppressor ESD Protection
ESD9FN5.0
Typical characteristics (at TA=25oC unless otherwise noted)
I
IF
Formosa MS
V V VC BR RWM
IR VF
IT
IPP
V
Uni-Directional TVS
VC : Clamping Voltage @ IPP
IPP : Maximum Reverse Peak Pulse Current
VRWM : Maximum Reverse Working voltage
IR : Maximum Reverse Leakage Current @VRWM
VBR : Breakdown voltage @IT
IT : Test Current
PPP : Peak Pulse Power
IF : Forward Current
VF : Forward Voltage @ IF
CJ : Max. Capacitance @VR = 0V and f = 1MHz
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 3
Document ID
DS-121850
Issued Date
2011/11/25
Revised Date
2015/12/11
Revision
E
Page.
7







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)