Power Switch. DP2545 Datasheet

DP2545 Switch. Datasheet pdf. Equivalent

DP2545 Datasheet
Recommendation DP2545 Datasheet
Part DP2545
Description High Precision CC/CV Primary-Side PWM Power Switch
Feature DP2545; DP2545 High Precision CC/CV Primary-Side PWM Power Switch GENERAL DESCRIPTION DP2545 is a high perf.
Manufacture DEVELOPER MICROELECTRONICS
Datasheet
Download DP2545 Datasheet




DEVELOPER MICROELECTRONICS DP2545
DP2545
High Precision CC/CV Primary-Side PWM Power Switch
GENERAL DESCRIPTION
DP2545 is a high performance offline PWM power
switch for low power AC/DC charger and adapter
applications.It operates in primary-side sensing
and regulation.Consequently, opto-coupler and
TL431 could be eliminated. High Precision
Constant Voltage (CV) and Constant Current (CC)
control are integrated as shown in the figure below.
In CC control, the current and output power setting
can be adjusted externally by the sense resistor Rs
at CS pin. In CV control, multi-mode operations are
utilized to achieve high performance and high
efficiency. In addition, good load regulation is
achieved by the built-in Cable Drop Compensation.
Device operates in PFM in CC mode as well at
large load condition and it operates in PWM with
frequency reduction at light/medium load. The chip
consumes very low operation current, it can
achieve less than 75mW standby power.
DP2545 offers comprehensive protection coverage
with auto-recovery features including
Cycle-by-Cycle current limiting, VDD Over Voltage
Protection (VDD OVP), short circuit protection,
built-in leading edge blanking, VDD under voltage
lockout (UVLO), OTP, etc.
High precision constant voltage (CV) and constant
current (CC) can be achieved by DP2545.
DP2545 is offered in DIP7 package.
TYPICAL APPLICATION
FEATURES
± 5% Constant Voltage Regulation and
Current Regulation at Universal AC Input
Primary Side Regulation (PSR) Without TL431
and Opto-coupler
No Need for Control Loop Compensation
Programmable CV and CC Regulation
Multi-Mode PWM/PFM Operation
Output Short Load Protection
Less than 75mW Standby Power
Built-in Line Voltage and Primary Winding
Inductance Compensation
Built-in Adaptive Current Peak Regulation
Programmable Cable Drop Compensation
Audio Noise Free Operation
Built-in Over Temperature Protection (OTP)
Soft Gate Driver for Good EMI Performance
Built-in Leading Edge Blanking (LEB)
Cycle-by-Cycle Current Limiting
VDD Under Voltage Lockout with Hysteresis
(UVLO)
VDD OVP & Clamp
APPLICATIONS
Low Power AC/DC offline SMPS for
Cell Phone Charger
Digital Camera Charger
Small Power Adapter
Auxiliary Power for PC, TV etc.
Linear Regulator/RCC Replacement
www.depuw.com
- 1 -/9
Rev.1.0 JULY 2016



DEVELOPER MICROELECTRONICS DP2545
DP2545
High Precision CC/CV Primary-Side PWM Power Switch
GENERAL INFORMATION
Pin Configuration
The pin map of DIP7
below.
package is shown as
Ordering Information
Part Number
Description
DP2545
DIP7, Rohs, 50Pcs/Tube
Package Dissipation Rating
Package
DIP7
RJA (/W)
75
Absolute Maximum Ratings
Parameter
Value
Drain Voltage (off state)
-0.3 to 650V
VDD Zener Clamp Voltage
VDD_Clamp
VDD Clamp
Current
Continuous 10 mA
CS Input Voltage
-0.3 to 7V
INV Input Voltage
-0.3 to 7V
Maximum Operating Junction
Temperature TJ
150 oC
Min/Max Storage Temperature
Tstg
-55 to 150 oC
Lead Temperature (Soldering,
10secs)
260 oC
Note: Stresses beyond those listed under “absolute maximum
ratings” may cause permanent damage to the device. These
are stress ratings only, functional operation of the device at
these or any other conditions beyond those indicated under
“recommended operating conditions” is not implied. Exposure
to absolute maximum-rated conditions for extended periods
may affect device reliability.
www.depuw.com
- 2 -/9
Rev.1.0 JULY 2016



DEVELOPER MICROELECTRONICS DP2545
Marking Information
DP2545
High Precision CC/CV Primary-Side PWM Power Switch
DP2545 for product name;
XXXXXX the first X reresents the last year,2016 is 6; The second X represents the month, in
A-L 12 letters;The third and fourth X on behalf of the date, 01-31 said; The last two X represents
the wafer batch code.
TERMINAL ASSIGNMENTS
Pin Num
1
2
3
4
5/6
7
Pin Name
VDD
NC
INV
CS
Drain
GND
I/O Description
P Power supply.
- No connect.
I
The voltage feedback from auxiliary winding. Connected to resistor divider
from auxiliary winding reflecting output voltage.
I Current sense input.
O The Power MOSFET Drain
P Ground.
www.depuw.com
- 3 -/9
Rev.1.0 JULY 2016







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)