High Sensitivity CMOS Hall IC
Low Current Consumption, High Sensitivity CMOS Hall IC
LN4916
■ General Description
LN4916 is with two Hall effect pla...
Description
Low Current Consumption, High Sensitivity CMOS Hall IC
LN4916
■ General Description
LN4916 is with two Hall effect plates and a CMOS output driver, mainly designed for battery–powered, hand-held equipment (such as Cellular and Cordless Phone, PDA). E.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages of 2.4V-5.5V. Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (HIGH), the output is held until B is lower than release point (Brp), then turned off.
■ Typical Application Circuit
VDD
1uF
VOUT
LN4916
GND
■ Operating Parameters
Operating temperature range TMIN ≤ TA ≤ TMAX Operating voltage range
−40°C ≤ TA ≤ 85°C 2.0V ≤ VDD ≤ 6.0V
■ Features
2.4V to 5.5V battery operation Operation with North or South Pole Chopper stabilized Superior...
Similar Datasheet