Precision Op-amps. TP2332 Datasheet

TP2332 Op-amps. Datasheet pdf. Equivalent

TP2332 Datasheet
Recommendation TP2332 Datasheet
Part TP2332
Description Low Noise Precision Op-amps
Feature TP2332;     Features TP2331/TP2332  /TP2334 1.6MHz  Bandwidth,  Low  Noise  Precision  Op‐amps Description .
Manufacture 3PEAK
Datasheet
Download TP2332 Datasheet




3PEAK TP2332
 
 
Features
TP2331/TP2332  /TP2334
1.6MHz  Bandwidth,  Low  Noise  Precision  Opamps
Description
Offset Voltage: 50 μV (max)
Low Noise: 13nV/Hz(f= 1kHz)
Supply Current: 190μA/ch
Low THD+N: 0.0005%
Supply Range: 2.2V to 5.5V
Low Input Bias Current: 0.3pA Typical
Slew Rate: 0.9 V/μs
EMIRR IN+: 85 dB( under 2.4GHz)
Gain-bandwidth Product: 1.6MHz
Rail-to-Rail I/O
High Output Current: 70mA (1.0V Drop)
–40°C to 125°C Operation Range
Robust 7kV – HBM and 2kV – CDM ESD Rating
Applications
The TP2331/TP2332/TP2334 are single/dual/quad, low
offset, low noise operational amplifiers with low power
consumption and rail-to-rail input/output swing.
Input offset voltage is trimmed to less than 50μV and the
CMOS inputs draw less than 0.3pA of bias current. The
low offset drift, excellent CMRR, and high voltage gain
make it a good choice for precision signal conditioning.
Each amplifier draws only 190μA current on a 3V supply.
The micro power, rail-to-rail operation of the TP233x
series is well suited for portable instruments and single
supply applications.
The TP2331 is single channel version available in 8-pin
SOP and 5-pin SOT23 packages. The TP2332 is dual
channel version available in 8-pin SOP and MSOP
packages. The TP2334 is quad channel version
available in 14-pin SOP and TSSOP packages.
Photodiode detection
High Impedance Sensor Amplifier
Microvolt Accuracy Threshold Detection
Instrumentation Amplifiers
Communications
Security
Battery Powered Applications
3PEAK and the 3PEAK logo are registered trademarks of
3PEAK INCORPORATED. All other trademarks are the property of
their respective owners.
Pin Configuration (Top View)
TP2331
8-Pin SOP
(-S Suffix)
NC 1
In 2
In 3
Vs 4
8 NC
7 Vs
6 Out
5 NC
TP2332
8-Pin SOP/MSOP
(-S and -V Suffixes)
Out A 1
In A 2
In A 3
Vs 4
A
B
8 Vs
7 Out B
6 In B
5 In B
TP2331
5-Pin SOT23
(-T Suffix)
Out 1
Vs 2
+In 3
5 Vs
4 -In
TP2334
14-Pin SOP/TSSOP
(-S and -T Suffixes)
Out A 1
In A 2
In A 3
Vs 4
In B 5
In B 6
Out B 7
A
B
14 Out D
13 In D
D
12 In D
11 Vs
10 In C
C
9 In C
8 Out C
  
Offset Voltage Production Distribution
 
2500
Number = 53158 pcs
2000
1500
1000
500
0
50 40 30 20 10 0 10 20 30 40 50
Offset Voltage
www.3peakic.com
Rev. A
1 



3PEAK TP2332
TP2331 / TP2332 / TP2334 
 
1.6MHz Bandwidth, Low Noise Precision Opamps 
Order Information
Model Name
TP2331
TP2332
TP2334
Order Number
TP2331-SR
TP2331-TR
TP2332-SR
TP2332-VR
TP2334-SR
TP2334-TR
Package
8-Pin SOP
5-Pin SOT23
8-Pin SOP
8-Pin MSOP
14-Pin SOP
14-Pin TSSOP
Transport Media, Quantity
Tape and Reel, 4,000
Tape and Reel, 3,000
Tape and Reel, 4,000
Tape and Reel, 3,000
Tape and Reel, 2,500
Tape and Reel, 3,000
Marking
Information
TP2331
331
TP2332
TP2332
TP2334
TP2334
Absolute Maximum Ratings Note 1
Supply Voltage: V+ – VNote 2............................7.0V
Input Voltage............................. V– 0.3 to V+ + 0.3
Input Current: +IN, –IN Note 3.......................... ±20mA
Output Current: OUT.................................... ±160mA
Output Short-Circuit Duration Note 4…......... Indefinite
Current at Supply Pins……………............... ±60mA
Operating Temperature Range........–40°C to 125°C
Maximum Junction Temperature................... 150°C
Storage Temperature Range.......... –65°C to 150°C
Lead Temperature (Soldering, 10 sec) ......... 260°C
Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum
Rating condition for extended periods may affect device reliability and lifetime.
Note 2: The op amp supplies must be established simultaneously, with, or before, the application of any input signals.
Note 3: The inputs are protected by ESD protection diodes to each power supply. If the input extends more than 500mV beyond the power supply, the input
current should be limited to less than 10mA.
Note 4: A heat sink may be required to keep the junction temperature below the absolute maximum. This depends on the power supply voltage and how many
amplifiers are shorted. Thermal resistance varies with the amount of PC board metal connected to the package. The specified values are for short traces
connected to the leads.
ESD, Electrostatic Discharge Protection
Symbol
HBM
CDM
Parameter
Human Body Model ESD
Charged Device Model ESD
Condition
MIL-STD-883H Method 3015.8
JEDEC-EIA/JESD22-C101E
Thermal Resistance
Package Type
5-Pin SOT23
8-Pin SOP
8-Pin MSOP
8-Pin SOT23
14-Pin SOP
14-Pin TSSOP
θJA
250
158
210
196
120
180
θJC
81
43
45
70
36
35
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
Minimum Level
7
2
Unit
kV
kV
2  Rev. A
www.3peakic.com



3PEAK TP2332
        
TP2331/TP2332 / TP2334
Electrical Characteristics
1.6MHz Bandwidth, Low Noise Precision Opamps
The specifications are at TA = 27°C. VS = +2.7 V to +5.5 V, or ±1.35 V to ±2.75 V, RL = 2k, CL =100pF.Unless otherwise noted.
SYMBOL
VOS
VOS TC
PARAMETER
Input Offset Voltage
Input Offset Voltage Drift
IB Input Bias Current
IOS
Vn
en
in
CIN
CMRR
VCM
PSRR
AVOL
VOL, VOH
ROUT
RO
ISC
VDD
IQ
PM
GM
GBWP
SR
FPBW
tS
THD+N
Xtalk
Input Offset Current
Input Voltage Noise
Input Voltage Noise Density
Input Current Noise
Input Capacitance
Common Mode Rejection Ratio
Common-mode Input Voltage
Range
Power Supply Rejection Ratio
Open-Loop Large Signal Gain
Output Swing from Supply Rail
Closed-Loop Output Impedance
Open-Loop Output Impedance
Output Short-Circuit Current
Supply Voltage
Quiescent Current per Amplifier
Phase Margin
Gain Margin
Gain-Bandwidth Product
Slew Rate
Full Power Bandwidth Note 1
Settling Time, 0.1%
Settling Time, 0.01%
Total Harmonic Distortion and
Noise
Channel Separation
CONDITIONS
VCM = VDD/2, VDD= 5V
-40°C to 125°C
TA = 27 °C
TA = 85 °C
TA = 125 °C
f = 0.1Hz to 10Hz
f = 1kHz
f = 1kHz
Differential
Common Mode
VCM = 2V to 3V
VCM = 2.5V, VS = 4.8V to 5V
RLOAD = 2k
RLOAD = 2k
G = 1, f =1kHz, IOUT = 0
f = 1kHz, IOUT = 0
Sink or source current
MIN
-50
85
V-0.1
75
100
95
2.2
RLOAD = 1k, CLOAD = 60pF
RLOAD = 1k, CLOAD = 60pF
f = 1kHz
AV = 1, VOUT = 1.5V to 3.5V, CLOAD =
60pF, RLOAD = 1k
0.36
AV = –1, 1V Step
f = 1kHz, AV =1, RL = 2k, VOUT = 1Vp-p
f = 1kHz, RL = 2k
TYP
±2
1
0.3
150
300
0.001
4.1
13
2
7.76
6.87
110
100
130
15
0.002
125
130
190
80
15
1.6
0.84
58.6
4.4
4.4
0.0003
110
MAX
+50
2
3
V+-0.1
45
5.5
280
UNITS
μV
μV/°C
pA
pA
pA
pA
μVPP
nV/Hz
fA/Hz
pF
dB
V
dB
dB
mV
mA
V
μA
°
dB
MHz
V/μs
kHz
μs
%
dB
Note 1: Full power bandwidth is calculated from the slew rate FPBW = SR/π • VP-P
www.3peakic.com
Rev. A
3 







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)