Filter Driver. TPF131 Datasheet

TPF131 Driver. Datasheet pdf. Equivalent

TPF131 Datasheet
Recommendation TPF131 Datasheet
Part TPF131
Description 36M HD Composite Video Filter Driver
Feature TPF131; Features  1-HDTV Video Filter Support Composite 1080i/720p  Optimized 6th-order Butterworth Video .
Manufacture 3PEAK
Datasheet
Download TPF131 Datasheet




3PEAK TPF131
Features
1-HDTV Video Filter Support Composite 1080i/720p
Optimized 6th-order Butterworth Video reconstruction
filter
HD Channel: -3dB 36MHz
Support Multiple Input Biasing:
- Provide 80-mV Level-Shift when DC-Coupled
- Transparent Input Clamping when AC-Coupled
- Support External DC Biasing when AC-Coupled
Very Low Quiescent Current: 6 mA(at 3.3V, Typical)
6dB Gain(2V/V), Rail TO Rail Output
AC- or DC-Coupled Output Driving Dual Video Loads
(75)
Wide Power Supply: +3.0V to +5.5V Single Supply
Robust ESD Protection:
- Robust 8kV – HBM and 2kV – CDM ESD Rating
Green Product, SOT23-6 Package
Applications
Video Signal Amplification
Set-Top Box Video Driver
PVRDVD Player Video Buffer
Video Buffer for Portable or USB-Powered Video
Devices
HDTV
TPF131
36M HD Composite Video Filter Driver
Description
TPF131 is a specially designed for consumer applications,
high-performance, low-cost video reconstruction filter, it
combine excellent video performance and low power
consumption perfectly. It incorporates one high-definition (HD)
filter channels. The filter feature sixth-order Butterworth
characteristics that are useful as digital-to-analog converter
(DAC) reconstruction filters or as analog-to-digital converter
(ADC) anti-aliasing filters. The HD filters can be bypassed to
support HDCVI 1080i/720p video.
As part of the TP131 flexibility, the input can be configured for
ac- or dc-coupled inputs. The 84-mV output level shift allows
for a full sync dynamic range at the output with 0-V input. The
ac-coupled modes include a transparent sync-tip clamp
option for composite video (CVBS), Y', and G'B'R' signals.
AC- coupled biasing for C'/P'B/P'R channels can easily be
achieved by adding an external resistor to VS+.
The TP131 rail-to-rail output stage with 6-dB gain allows for
both ac and dc line driving. The ability to drive two lines, or
75-loads, allows for maximum flexibility as a video line
driver. The 6-mA total quiescent current at 3.3 V makes it an
excellent choice for power-sensitive video applications.
TPF131 is available in SOT23-6 package (TPF131-TR). Its
operation temperature range is from 40°C to +85°C.
Related Resources
AN-1201: Application notes of TPF1xx
Pin configuration (Top View)
NC 1
HD OUT 2
NC 3
TPF131
6-Pin SOT23
(-T Suffix)
6 +Vs
5 GND
4 HD IN
Figure 1.
Pin Name
HD IN
+VS
GND
HD OUT
NC
Pin Function
HD video input, LPF = 36 MHz
Positive Power Supply
Ground
HD video output, LPF = 36 MHz
No Connection
Rev. A
www.3peakic.com
©2014 3PEAK INCORPORATED



3PEAK TPF131
TPF131
36M HD Composite Video Filter Driver
Function Block
Order Information
Order Number
TPF131-TR
Operating
Temperature
Range
-40 to 85°C
Figure 2.
Package
6-Pin SOT23-6
Package
Options
MSL-3
Transport Media, Quantity
Tape and Reel, 3000
Absolute Maximum Ratings*
VIN
IO
TJ
TA
TSTG
TL
Parameters
Power Supply, VDD to GND
Input Voltage
Output Current
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering 10 sec)
Value
Units
6.0 V
VDD + 0.3V to GND - 0.3V
65 mA
150 °C
–45 to 85
°C
–65 to 150
°C
300 °C
* Note: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime.
(1) This data was taken with the JEDEC low effective thermal conductivity test board.
(2) This data was taken with the JEDEC standard multilayer test boards.
ESD, Electrostatic Discharge Protection
Symbol
Parameter
Condition
HBM
CDM
Human Body Model ESD MIL-STD-883H Method 3015.8
Charged Device Model ESD JEDEC-EIA/JESD22-C101E
Minimum
Level
8
2
Unit
kV
kV
©2014 3PEAK INCORPORATED
~2~
Rev. A
www.3peakic.com



3PEAK TPF131
TPF131
36M HD Composite Video Filter Driver
Electrical Characteristics All test condition is VDD = 3.3V, TA = +25°C, RL = 150to GND,
unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN TYP MAX UNITS
Input Electrical Specifications
VDD Supply Voltage Range
IDD Quiescent current (IQ) (1)
ICLAMP-DOWN
ICLAMP-UP
VCLAMP
RIN
AV
VOLS
VOL
VOH
Clamp Discharge Current
Clamp Charge Current
Input Voltage Clamp
Input Impedance
Voltage Gain
Output Level Shift Voltage
Output Voltage Low Swing
Output Voltage High Swing
PSRR
Power Supply Rejection Ratio
ISC Short-circuit current
3.0 5.5 V
VDD = 3.3V, VIN = 500mV, no load
6 8 mA
VDD = 5.0V, VIN = 500mV, no load
8.3 9.8 mA
VIN=300mV, measure current
0.6 2.0 4.8 μA
VY = -0.2V
-1.5 -1.7
mA
IY = -100μA
-40 0 +40 mV
0.5V < VY < 1V
VIN=0.5V,1V or 2V
RL=150to GND
VIN = 0V, no load, input referred
0.5 3
M
5.91 6.01 6.03 dB
54 80 124 mV
VIN = -0.3V, RL =75
VloIaNd=) 3V, RL =75to GND (dual
ΔVDD = 3.3V to 3.6V
0.05
3.18
61
V
V
dB
ΔVDD = 5.0V to 5.5V, 50Hz
67 dB
VIN = 2V, 10, output to GND
65
mA
VIN =0.1V, output short to VDD
65
mA
AC Electrical Specifications
f-1dB
-1dB
Bandwidth
HD Channel
RL=150
27.3 31.0 34.7 MHz
f-3dB
dG
dP
THD
D/DT
XTALK
SNR
ROUT_AC
-3dB
Bandwidth
HD Channel
Differential Gain
Differential Phase
Total
Harmonic
Distortion
HD Channel
Group Delay
Variation
HD Channel
Channel Crosstalk
Signal-to-Noise
Ration
HD Channel
Output Impedance
RL=150
Video input range 1V
Video input range 1V
f=1MHz, VOUT=1.4VPP
f = 100kHz to 60MHz
f = 1MHz, VOUT=1.4VPP
f= 100kHz to 30MHz
f = 10MHz
31.9 35.5 39.3 MHz
-0.1 0.4 0.8 %
-1.1 0.7 1.1 °
0.02 %
5.0
-68 -74
66 71
0.5
ns
dB
dB
Note: (1). 100% tested at TA=25°C.
Rev. A
www.3peakic.com
~3~
©2014 3PEAK INCORPORATED







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)