3
Hall Magnetic Field Sensor
KY-003
Hall Magnetic Field Sensor
TABLE OF CONTENTS
1. Overview 2. Pin-Assignment 3. Code ...
3
Hall Magnetic Field Sensor
KY-003
Hall Magnetic Field Sensor
TABLE OF CONTENTS
1. Overview 2. Pin-Assignment 3. Code Example Arduino 4. Code Example Raspberry Pi 5. Information and take-back obligations 6. Support
Published: 27.08.2018
Copyright by Joy-IT
2
Hall Magnetic Field Sensor
1. OVERVIEW
Dear customer, Thank you for choosing our product. In the following, we will show you what to observe during commissioning and use. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
Chipset Sensor Type
A3141 Hall Effect
Transistor/Switch
The
transistor switches through if the module is held in a magnetic field. This can then be read out at the signal output as an analog voltage value.
2. PIN-ASSIGNMENT
Pin Assignment Arduino
LED +
Pin 13
LED -
Pin GND
Signal
Pin 10
+V Pin 5V
GND Pin GND
Pin Assignment Raspberry Pi
Signal
GPIO24 [Pin 18]
+V 3,3V [Pin 1]
GND Masse [Pin 6]
Published: 27.08.2018
Copyright by Joy-IT
3
Hall Ma...