OCXO131-1001 OSCILLATOR Datasheet

OCXO131-1001 Datasheet, PDF, Equivalent


Part Number

OCXO131-1001

Description

CRYSTAL OSCILLATOR

Manufacture

ISOTEMP

Total Page 3 Pages
Datasheet
Download OCXO131-1001 Datasheet


OCXO131-1001
OCXO 131-1001
www.isotemp.com www.taitien.com
CRYSTAL OSCILLATOR SPECIFICATION
This specification defines the operating characteristics of an ovenized crystal
oscillator. Long term stability is assured through use of premium components.
REV.
DESCRIPTION OF REVISION
-
A Put on new form.
DWN. BY APV. BY
DATE
BTG TST 03-04-2006
JTL TST 08-15-2011
1. OUTPUT(PIN = "R.F. OUTPUT")
1.1. Frequency
1.2. Waveform
1.3. Level
1.4. Load
1.5. Harmonics
1.6. Spurious
2. FREQUENCY STABILITY
2.1. Ambient
2.2. Aging
a. At time of shipment
b. After indefinite storage
i. Daily
ii. Yearly
iii.10 years
2.3. Voltage
2.4. Load
2.5. Warm-up
2.6. Phase Noise
a. @ 1 Hz
b. @ 10 Hz
c. @ 100 Hz
d. @ 1 kHz
e. @ 10 kHz
10.000000 MHz
Sine wave
+8 ±2 dBm
50 Ω ±5%
< -30 dBc
< -60 dBc
< ±2x10-8, 0C to +70C
(referenced to +25C)
< ±1x10-9/day
< ±1x10-9 after 30 days
< ±1x10-7
< ±3x10-7
< ±1x10-8/±5% change
< ±5x10-9/±5% change
< ±2x10-8 in 5 minutes @ +25 ±1C
(referenced to 4 hours)
< -90 dBc
< -120 dBc
< -140 dBc
< -148 dBc
< -150 dBc
OUR PERFORMANCE
YOUR REPUTATION
MODEL NO.
OCXO 131-1001
PAGE OF TOTAL
12
DWG. NO. REV.
114-1245
A

OCXO131-1001
OCXO 131-1001
www.isotemp.com www.taitien.com
3. ELECTRICAL FREQUENCY ADJUSTMENT (PIN = "VCO INPUT")
3.1. Range
> ±4x10-7
< ±9x10-7 (At time of shipment)
(Referenced to nominal frequency)
3.2. Control
0 to +5 V
3.3. Slope
Positive
3.4. Center Voltage
+2.5 ±0.5 V
(Control voltage at which nominal
frequency occurs at time of shipment)
NOTE: When not connected, VCO INPUT is internally held at this voltage.
3.5. Input impedance
> 100 kΩ
4. INPUT POWER (PIN = "+VDC")
4.1. Voltage
4.2. Current
4.3. Steady state
+12 V ±5%
< 350 mA @ turn on
< 1.5 Watts @ +25C
5. REFERENCE VOLTAGE (PIN = "REFERENCE VOLTAGE"), an output
5.1. Voltage
+8 V ±5%
5.2. Load
> 9 kΩ
5.3. Temperature stability
< ±0.0015 V
(Over temperature range in 2.1)
6. RoHS
All units supplied under this MODEL NUMBER are RoHS compliant.
7. MECHANICAL(Outline drawing)
7.1. Applicable series
7.2. Model number
7.3. Outline drawing
OCXO 131 series
OCXO 131-1001
125-587
OUR PERFORMANCE
YOUR REPUTATION
MODEL NO.
OCXO 131-1001
PAGE OF TOTAL
22
DWG. NO. REV.
114-1245
A


Features OCXO 131-1001 www.isotemp.com www.taitie n.com CRYSTAL OSCILLATOR SPECIFICATION This specification defines the operati ng characteristics of an ovenized cryst al oscillator. Long term stability is a ssured through use of premium component s. REV. DESCRIPTION OF REVISION - A Put on new form. DWN. BY APV. BY DAT E BTG TST 03-04-2006 JTL TST 08-15-20 11 1. OUTPUT(PIN = "R.F. OUTPUT") 1.1. Frequency 1.2. Waveform 1.3. Level 1.4 . Load 1.5. Harmonics 1.6. Spurious 2. FREQUENCY STABILITY 2.1. Ambient 2.2. A ging a. At time of shipment b. After in definite storage i. Daily ii. Yearly ii i.10 years 2.3. Voltage 2.4. Load 2.5. Warm-up 2.6. Phase Noise a. @ 1 Hz b. @ 10 Hz c. @ 100 Hz d. @ 1 kHz e. @ 10 k Hz 10.000000 MHz Sine wave +8 ±2 dBm 50 Ω ±5% < -30 dBc < -60 dBc < ±2x10 -8, 0C to +70C (referenced to +25 C) < ±1x10-9/day < ±1x10-9 after 3 0 days < ±1x10-7 < ±3x10-7 < ±1x10-8 /±5% change < ±5x10-9/±5% change < 2x10-8 in 5 minutes @ +25 ±1C (referenced to 4 hours) < -9.
Keywords OCXO131-1001, datasheet, pdf, ISOTEMP, CRYSTAL, OSCILLATOR, CXO131-1001, XO131-1001, O131-1001, OCXO131-100, OCXO131-10, OCXO131-1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)