OCXO-131-1000 OSCILLATOR Datasheet

OCXO-131-1000 Datasheet, PDF, Equivalent


Part Number

OCXO-131-1000

Description

CRYSTAL OSCILLATOR

Manufacture

ISOTEMP

Total Page 4 Pages
Datasheet
Download OCXO-131-1000 Datasheet


OCXO-131-1000
PHONE: (434) 295-3101
FAX: (434) 977-1849
Charlottesville, VA USA
www.isotemp.com
OCXO 131-1000
CRYSTAL
OSCILLATOR
SPECIFICATION
This specification defines the operating characteristics of
an ovenized crystal oscillator. Long term stability is
assured through use of premium components.
REV
DESCRIPTION OF REVISION
BY APV
DATE
- BTG TST 03-04-2006
ISOTEMP RESEARCH INC. CODE ID MODEL NO. PAGE OF TOTAL DWG. NO. REV.
CHARLOTTESVILLE, VA.
USA
31785 OCXO 131-1000 1
3 114-1244 -

OCXO-131-1000
Charlottesville, VA USA
www.isotemp.com
OCXO 131-1000
1. OUTPUT (PIN = "R.F. OUTPUT")
1.1. Frequency
1.2. Waveform
1.3. Level
1.4. Load
1.5. Harmonics
1.6. Spurious
10.000 MHz
Sine wave
+8 ±2 dBm
50 ±5%
< -30 dBc
< -60 dBc
2. FREQUENCY STABILITY
2.1. Ambient
2.2. Aging
a. At time of shipment
b. After indefinite storage
i. Daily
ii. Yearly
iii. 10 years
2.3. Voltage
2.4. Load
2.5. Warm-up
2.6. Phase noise
a. @ 1 Hz
b. @ 10 Hz
c. @ 100 Hz
d. @ 1 kHz
e. @ 10 kHz
< ±1x10-8, 0°C to +70°C
(referenced to +25°C)
< ±5x10-10/day
< ±5x10-10 after 30 days
< ±1x10-7
< ±3x10-7
< ±1x10-8/±5% change
< ±5x10-9/±5% change
< ±2x10-8 in 5 minutes @ +25°C
(referenced to 4 hour)
< -90 dBc
< -120 dBc
< -140 dBc
< -148 dBc
< -150 dBc
3. ELECTRICAL FREQUENCY ADJUSTMENT (PIN = "VCO INPUT")
3.1. Range
> ±4x10-7
< ±9x10-7 (At time of shipment)
(Referenced to nominal frequency)
3.2. Control
0 to +5 V
3.3. Slope
Positive
3.4. Center
+2.5 ±0.5 V
(Control voltage at which nominal
frequency occurs at time of shipment)
3.5. Input impedance
> 100 k
4. INPUT POWER (PIN = "+VDC")
4.1. Voltage
4.2. Current
4.3. Steady state
+12 V ±5%
< 350 mA @ turn on
< 1.5 Watts @ +25°C
ISOTEMP RESEARCH INC. CODE ID MODEL NO. PAGE OF TOTAL DWG. NO. REV.
CHARLOTTESVILLE, VA.
USA
31785 OCXO 131-1000 2
3 114-1244 -


Features PHONE: (434) 295-3101 FAX: (434) 977-184 9 Charlottesville, VA USA www.isotemp. com OCXO 131-1000 CRYSTAL OSCILLATOR SPECIFICATION This specification define s the operating characteristics of an o venized crystal oscillator. Long term s tability is assured through use of prem ium components. REV DESCRIPTION OF RE VISION BY APV DATE - BTG TST 03-04-2 006 ISOTEMP RESEARCH INC. CODE ID MODE L NO. PAGE OF TOTAL DWG. NO. REV. CHAR LOTTESVILLE, VA. USA 31785 OCXO 131-1 000 1 3 114-1244 - Charlottesville, V A USA www.isotemp.com OCXO 131-1000 1 . OUTPUT (PIN = "R.F. OUTPUT") 1.1. Fre quency 1.2. Waveform 1.3. Level 1.4. Lo ad 1.5. Harmonics 1.6. Spurious 10.000 MHz Sine wave +8 ±2 dBm 50 Ω ±5% < -30 dBc < -60 dBc 2. FREQUENCY STABIL ITY 2.1. Ambient 2.2. Aging a. At time of shipment b. After indefinite storage i. Daily ii. Yearly iii. 10 years 2.3. Voltage 2.4. Load 2.5. Warm-up 2.6. Ph ase noise a. @ 1 Hz b. @ 10 Hz c. @ 100 Hz d. @ 1 kHz e. @ 10 kHz < ±1x10-8, 0°C to +70°C (referen.
Keywords OCXO-131-1000, datasheet, pdf, ISOTEMP, CRYSTAL, OSCILLATOR, CXO-131-1000, XO-131-1000, O-131-1000, OCXO-131-100, OCXO-131-10, OCXO-131-1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)